jake2077
Jr. Member
- Joined
- Dec 6, 2018
- Messages
- 106
71 Bronco with a rebuilt 3 speed transmission and refreshed dana 20 transfer box performed by a local shop. Rebuilt engine with new clutch disc/plate and have good engagement with gears overall (still some linkage adjustment to do). Behavior that's got me confused is when in gear (2H on the T-tyle shifter) the back wheels turn as expected with clutch pedal released and in gear. When I press the clutch pedal in the wheels stop abruptly on or off pavement instead of coasting, which is what I'd expect. I did do a rear disc conversion and the wheels turn freely without much effort otherwise so I'm not sure the brakes are causing the wheels to stop. There is good separation from the throw-out bearing and clutch plate when idling and clutch pedal not engaged. Appreciate the help.