Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
4

4xfun

Jr. Member
Joined
Last seen
Messages
82

Latest activity Postings About

    • 4
      4xfun replied to the thread Brakes get grabby the more you drive.
      You mentioned all new parts. Were the rubber hoses new. Old hoses can degrade on the inside and the swelling limits the ability of the...
    • 4
      4xfun replied to the thread Can't get WH brake proportioning valve to center.
      Double check and make sure that you have plenty of grease for the pins and in the slides for the pads. I personally like sil-glyde, but...
    • 4
      4xfun replied to the thread 302 Manual Radiator Replacement.
      Make sure that your heater is on and is working. Test this before you start replacing radiator. You have a valve on the heater hose...
    • 4
      4xfun replied to the thread Column mount Tach w/ GPS Speedo?.
      That is going to be a difficult find. For that combination, the speedometer should be the dominant gauge. Have you looked at the...
    • 4
      4xfun replied to the thread Bronco won’t start- need your help!.
      Let me through a vote against towing it to a shop unless you have absolute confidence in the mechanic. This is a 50+ year old vehicle...
    • 4
      4xfun replied to the thread Vacuum Wiper rebuild.
      I remember someone using a thin gasket material and RTV to create the seal. There used to be a rebuild kit with gaskets and a paddle...
    • 4
      4xfun replied to the thread Bronco won’t start- need your help!.
      Did I miss the results of a battery test. You can still read 12 volts on a bad battery if there is no load. The battery needs to be...
    • 4
      4xfun replied to the thread Ignition switch frustration.
      It sounds like there is an issue with the wiring or connections that may get shifted when remove the tumbler. Intermittent wiring...
    Show older items
  • Loading…
  • Loading…
Top