67 Bronco build Flower Mound TX

Well, maybe in about 6 months.

Pickup up a 67 from Jim Holy. Not bad shape for sitting so long. Will need new floor pans, 1 rocker and the usual inner fender repair.

Nice! Jim is a good guy to know in Broncoland! ;D

Build update here for body off

http://classicbroncos.com/forums/showthread.php?t=116734&page=9

Body Off Continued

Been getting a bunch done on the bronco and it is looking nice. This is my first body off and I will do it this way every time in the future.

Suspension is done with front and rear diffs rebuilt. All new brake parts including drums, wheel cylinders and shoes. New shocks and all new bushings on the front end.

Original engine (C5) rebuilt with trans and transfer case acquired from Jim Holy with Hurst floor shifter installed.

New brake and fuel lines run.

About to do the exhaust and I might run the rear wires, but not sure I really need to do that before the body goes back on.

Need to do a little more welding on the body and then remove the rest of the paint before the body goes back on which should be in several weeks.

Here are some pictures.

cool to see a local build(Bedford Tx).. keep it up