Trying to locate a bracket that came on the 86-93 Mustang with power steering and air conditioning.
Bart,
Do you know which on you need? Maybe ID from this link?
Great link, Thanks. No I don't know which one, I was under the impression that it was all one piece. I bought a piece to use a Saginaw pump on the 5.0 but it doesn't work. Johnny said that I needed the bracket that also holds the ac bracket. I guess I'll have to wait til tomorrow (maybe Monday) to send him the picture a nd ask him. Maybe Dirt Donk will read this and reply. He's part of the Wild Horses guys.
https://lmr.com/item/LRS-10313A-K/mustang-engine-accessory-bracket-kit-79-93-5-0
Ransil, I'll keep you in mind when I find out what I need. I did a search yesterday and your for sale came up but was closed. Thanks for the reply.I have some stuff if you can identify which ones
I have some stuff if you can identify which ones
Ransil, if you would please look at the link that 904B shared and look almost all the way down to the bottom of the link page for a video showing the parts and their location. I don't need smog pump brackets or power steering bracket as I have the Wild horses bracket to use a Saginaw pump. Send me a PM letting me know what you have available and prices. Thanks
Hey 904Bronco, I see that you have a 2002 F250 7.3 with 193k and still going
I also have a 2002 F350 long bed crew cab 4x4 dually 7.3 with 183K and still going. I'm told the 7.3 is worth it's weigh in gold. I had a Ford dealer in Texas offer me $25K for mine. I couldn't replace it so I told him no.
I am up to 199K... Cannot tell you how many guys at the gas station have said to me: "I should never have gotten rid of my 7.3, everything after it has been junk"!
I'll definitely need the big stamped steel bracket. I believe I have the smaller aluminum bracket that's center of the still photo and I also believe I have the smaller stamped steel bracket that's in the bottom left of the still photo. I won't need the oem p.s. bracket. Looking at it again and again it looks like all I need are the large stamped steel bracket. As many of the oem bolts would be nice too.John:
In that video, what exactly do you need? Big stamped steel bracket on the front? As I noted in my socalbroncos post a bit ago, I found a car in the yard today that has this stuff on it. Perhaps I could pull if I know exactly what you need.
Todd Z.
I'll definitely need the big stamped steel bracket. I believe I have the smaller aluminum bracket that's center of the still photo and I also believe I have the smaller stamped steel bracket that's in the bottom left of the still photo. I won't need the oem p.s. bracket. Looking at it again and again it looks like all I need are the large stamped steel bracket. As many of the oem bolts would be nice too.
Many thanks for looking for me. The '75 is desended to have A/C (mall crawler) and a few other do-dads
Let me see what I can grab on Sat. morning for you.
Todd Z.
Thanks, I mentioned that to Todd Z also. Appreciate the look for stuff and the mentioning the bolts.i dont have the pieces you need, i have 2 c2 pumps and brackets and 1 modified stamped steel bracket ac part cut off.
btw i switched from a c2 pump to the WH saginaw , not impressed c2 did as good 37" and lockers & hydroboost.
make sure you get the hardware the bolts are long and a bitch to find