• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Best power steering conversion

tk1218

Bronco Guru
Joined
Nov 23, 2008
Messages
1,067
Loc.
Flower Mound
Wondering if anyone has an opinion on the best power steering conversion for an EB

criteria below

Cost effective
Parts from an vendors to include steering box, pump, hoses and shafts
Improves feel of stock manual or power steering
Would want part numbers if possible

Thanks
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,656
Loc.
Hawthorne ca
4x4x2 or a stock box with a Saginaw pump from napa. Wh has lines and pump bracket or you can get stuff from summit or Earl's to make the lines.
 
OP
OP
tk1218

tk1218

Bronco Guru
Joined
Nov 23, 2008
Messages
1,067
Loc.
Flower Mound
Would prefer to just bolt on, but could do minor fab

I tried the xterra swap and the box worked good, just leaked too much
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
34,939
The Xterra box is usually a dry box. I would guess you just got a bad box. Since you are already setup for it, I would just try another one.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,037
Xterra boxes are cheap at the yards...I'd get a good one or a rebuilt kit for the one you have and be done with it.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,656
Loc.
Hawthorne ca
As far as feel driving it mine felt alot nicer after swapping to a tie-rod over set up. I also swapped to a beefier set up while doing it.
 
Top