• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SOLD Bilstein 5125 12 in. Travel Shocks

Status
Not open for further replies.

Ol'Blue

Contributor
Bronco Guru
Joined
May 28, 2013
Messages
1,787
Bilstein 5125 Shocks with approximately 100 miles. Just been sitting in the garage. A little dirt and water stains but otherwise new.

F4-BE5-6249-H5

Extended - 29.7
Collapsed - 17.91

Valving 255/70
Travel - 11.94

Great valving for the rear - single shock or possibly as double shock in the front.

Thanks,
 

Attachments

  • IMG_2314.JPG
    IMG_2314.JPG
    92.3 KB · Views: 68
  • IMG_2315.JPG
    IMG_2315.JPG
    76.5 KB · Views: 44
OP
OP
Ol'Blue

Ol'Blue

Contributor
Bronco Guru
Joined
May 28, 2013
Messages
1,787
Very interested, what lift are this for?

It depends on shock mount placement, for the rear, if your mounts are stock, you probably need at least 4.5 to 5.5" lift. My eye to eye measurement with a 3.5" lift is about 21". Most want their shock mounted at mid stroke, so about 23.5" for these shocks. Unless you want tons of extension and not much compression.

Most will raise their shock mount location to take advantage of the longer stroke shocks.
 

70EarlyBronco

Jr. Member
Joined
Apr 21, 2016
Messages
79
Thanks for the reply, I have a 3.5 inch lift with stock mounting so I'll pass, good luck with the sale, they look new.
 
OP
OP
Ol'Blue

Ol'Blue

Contributor
Bronco Guru
Joined
May 28, 2013
Messages
1,787
Thanks for the reply, I have a 3.5 inch lift with stock mounting so I'll pass, good luck with the sale, they look new.

No problem, if my plans go well, I will be swapping out for 7100s in about a month. I will be posting my 10" travel Bilsteins then. Will be good for your lift.
 

DonaldDouchebag

Bronco Guru
Joined
Apr 17, 2008
Messages
1,097
No problem, if my plans go well, I will be swapping out for 7100s in about a month. I will be posting my 10" travel Bilsteins then. Will be good for your lift.

I'd be interested in your front shocks depending on valving. Good luck with the sale!
 
Status
Not open for further replies.
Top