Front seat relocation bracket

[Concrete]

Hello I’m looking for front seat relocation brackets for bucket seats.

 

[JeffG]

PM bigjhoov and see if he is still making these.

https://classicbroncos.com/forums/threads/seat-relocation-bracket-gauging-interest.265699/

 

[56f100bbw]

Move the drivers seat back 2“ real simple Flat strap 1/8 thick 1” x 3 1/2 long strap slotted hole at one and 5/16 threaded stud on the other end . Uses original nut inserts in floor . All 4 extenders are the same , had to relocate the lower mount on the seatbelt shoulder harness

 

[904Bronco]

PM bigjhoov and see if he is still making these.

https://classicbroncos.com/forums/threads/seat-relocation-bracket-gauging-interest.265699/

I have seen them pop up on one of the Bronco sites on FB...

 

[Fireball05]

I just bought this bracket from a guy on FB. Works great. Can move the seat back 2 or 4". Very sturdy, heavy duty bracket.

Search for a fella named "Jerry Hoover" on the FB bronco classified groups. Not sure how to add a link here, sorry.

 

[DirtDonk]

Hmmm, Jerry Hoover and BigJHoov are sounding like doppelgangers!

Paul

 

[SouthPaw74]

One of the best solutions for taller drivers! I got mine from BigJHoov and couldn't be happier!! Fast and friendly service, good price!

 

[jbawall]

I agree! I have one and I think it is perfect.

 

[craigdotcom]

Hi, I am looking for a seat relocation bracket like the one from BigJhoov. I reached out on FB marketplace but no response yet. Does anyone have an alternative recommendation? Any one try one ov the universal sets sold on ebay or the one from agasoutdoor? I do not get why they are curved .

https://www.agasooutdoor.com/parts-and-gear/p/driver-seat-extension-brackets

 

[56f100bbw]

Move the drivers seat back 2“ real simple Flat strap 1/8 thick 1” x 3 1/2 long strap slotted hole at one and 5/16 threaded stud on the other end . Uses original nut inserts in floor . All 4 extenders are the same , had to relocate the lower mount on the seatbelt shoulder harness

These four brackets were pretty easy to make a set of four 1 for each corner of the seat. Flat bar slotted for seat, adjustment i Welded a 5/16 threaded rod on one end I have pictures in the post above

 

[Oldtimer]

I do not get why they are curved .

https://www.agasooutdoor.com/parts-and-gear/p/driver-seat-extension-brackets

Optical illusion in photo.
They sit flat on the floor.
They are offset, to the side, because front & back mounting holes are not in line.

 

[bigjhoov]

Hi, I am looking for a seat relocation bracket like the one from BigJhoov. I reached out on FB marketplace but no response yet. Does anyone have an alternative recommendation? Any one try one ov the universal sets sold on ebay or the one from agasoutdoor? I do not get why they are curved .

https://www.agasooutdoor.com/parts-and-gear/p/driver-seat-extension-brackets

I've gotten a batch of inquiries lately, I'll get back with you. Trying to get production going again after recently moving both shop and house. Give me a little time to get organized and up and running again.

 

[betzgb]

I've gotten a batch of inquiries lately, I'll get back with you. Trying to get production going again after recently moving both shop and house. Give me a little time to get organized and up and running again.

hi Bigjhoov - just checking to see if you are up and running again for those brackets? Thanks!

 

[craigdotcom]

Seconding the inquiry, looking forward to getting these installed. Thanks

 

[chuckji]

Seconding the inquiry, looking forward to getting these installed. Thanks

Sent you a PM

 

[sokoloka]

I am interested in at least one set of these if not two! Any word on if they're being produced?