GM heater blower upgrade

[Arniep]

I know I've seen it here, but don't remember the source of the enlarged blower. It was a GM fan and cage, but can't remember from what vehicle or what years.

 

[doghows72]

http://classicbroncos.com/forums/showthread.php?t=54371&highlight=Heater+blower

Try here. Very good long thread should have all you need.

 

[Arniep]

That was what I needed. Thank you, Arnie

 

[sykanr0ng]

One from a 1987 through 1997 Ford F250 also works.

The same part number was used for '87 - '97 on Broncos, F150's and F350's.

 

[pcf_mark]

Check the different models suggested. The GM unit was like $80 when I bought it seemed steep for what is was.

Get ready for all the dust to get blown out of your duct work these fans kick the old one by 2-3X!

 

[1strodeo]

Dang wish I had known I just replaced my heater core, would've been a good time for an upgrade

 

[airman]

gonna make 2-3X the noise too. I did it. My next fix is vintage air unit.

 

[pcf_mark]

Correct it is louder but I am a lot warmer and my truck is pretty loud inside so when I'm moving I forget about it.

Also check your wiring. If it is all sketchy the higher current draw will do it in.

 

[riggermortis]

http://broncozone.com/topic/18919-early-bronco-heater-upgrade/#entry111095

 

[Arniep]

Good info on the Ford blower. I've got a F250 parts truck in the back lot.