Good source for steering shaft C clip and steering wheel nut?

[Banjer Picker]

The c clip on my steering shaft was completely missing, but I see in the exploded diagram that it's part of the assembly at the top of the column. My steering wheel nut is pretty gnarly as well. Aside from going to the pick n pull where can I snag these?

Is the c clip basically a smaller version of the one u put on the outside of your front axle shafts?

Thanks

 

[BUCKNBRONK]

I see- bronco graveyard, driven 4x4 parts might be a good place to start- just by looking at the top of the page

 

[Timmy390]

The C-clip is a "full circle" C clip. The style you need to use special pliers on.

example
http://extremeaxlesales.com/fullcirclec-clipkit60u-joint.aspx

Home Depot or Lowe's will have them or Tractor Supply

The nut I'm not sure about. Have you checked the vender sites?

Tim

 

[NicksTrix]

the nut is a 9/16 -18 lock nut.

 

[Banjer Picker]

Thanks for the feedback gang.

Didn't see either on the vendor sites so figured its most likely b/c it was common enough to be sourced at a hardware store.

Thanks Timmy. That's exactly what I figured it was. I even have those pliers already.

Man, this place is great!