MN Junk 302 oil pan screw on dipstick style

[joshua]

City: Rochester

Really just looking for the dipstick plate/bracket on the side. So if you have a rotten pan with this style of dipstick tube. Please lmk. Not trying to be cheap. Just after market pan is an aftermarket pan.

Mine is the press in style. Want to switch it to the screw in. Thanks!

 

[56f100bbw]

I think if you want to screw in the dipstick and not the slip in style, you’ll have to change out the oil pan, I have drilled out the rivets and made a new gasket on the inside of the pan and bolted it in no leaks but a little work .Finding just a bracket might be difficult

 

[joshua]

Ya I knew it would be a long shot. I’ll probably just braze some 3/8 tube in there with a flare fitting.

 

[68Broncoz]

I have a pan with push in style dip stick tube