• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tech Article on Removing Dana 20

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
If you don't shim the outputs correctly they will pop out under load/unload conditions. You probably won't need gears unless you have been crash locking it (which I doubt you did).
 
Top