• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Injector question

Dawg_enD

Full Member
Joined
Aug 9, 2003
Messages
331
Hi all,

I'm finally back working on my EFI swap. Today I was reminded of why I felt this project was 2.1 steps forward, two steps back...

Anyway, on to my question!

I have an Explorer 5.0 with the returnless fuel rails. Today I yanked them and am going to put on the return fuel rails. I heard once that the two rails use different injectors. The ones I currently have are cream colored (17 lb/hr?) and the old rails use an orange one, rumored to be 19 lb/hr. I called Ford today to get new ones. The fellas at the parts counter basically told me to get the numbers off the injectors I want, then they could get some for me. They also said the injectors were $100 per. :eek: !!!! :eek: I then checked Summit Racing and they have a few different 19 lb/hr ones listed. Different impedences is the only obvious thing I noticed, but I'm not too savy.

Which ones do I need for this motor?

Thanks much!
Mike
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
Impedence is pretty important, make sure you get the injectors that will work with your computer, also, I'd be a little worried that the injector rails would fit the injector spacing...
 

HoosierDaddy

Contributor
Bronco Guru
Joined
May 29, 2006
Messages
2,776
I'm doing the "do it yourself" cleaning bit also.

Regardless , doesn't he need to match the fuel injectors (size/color) to the computer he is going to use , unless he reprograms the 'puter for the different injectors. What is your computer out of?

Try these for rebuilt injectors:
http://cgi.ebay.com/ebaymotors/Fuel...196554232QQcmdZViewItem?hash=item280196554232

http://cgi.ebay.com/ebaymotors/Ford...008QQitemZ180211323920QQrdZ1QQsspagenameZWDVW.
I've never used them , just showing that there are better ways to spend $800. Go to a bone yard and get some and send them off to be cleaned , still big money ahead.
 
Last edited:

fordtrucks4ever

Bronco Guru
Joined
Oct 8, 2006
Messages
1,280
Loc.
DFW
I bought the oring/screen kits on ebay for a few bucks, then soaked injectors in lacquer thinner for a few hours. Then swished around and blew thru them until clean with until no signs of residual varnish. Man what a difference. The orange ones are 19/lb and used in trucks, 5.8 and HO motors. Your motor needs whatever injector the ecm is programed for.
 
OP
OP
D

Dawg_enD

Full Member
Joined
Aug 9, 2003
Messages
331
Alrighty, thanks for the info, guys!

I'll give cleaning them out a shot. I had (have) no intention of spending $800 for new injectors, believe me. I just thought the injectors had to be different for the different fuel rail.
Thanks!
 
Top