• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

on board air ,compressor installed ,,

mr incredible

Bronco Guru
Joined
Feb 25, 2007
Messages
2,217
ok folks what do you think ? any one got an ingenious idea for the oil on one of these york compressors ? dipsticks ? tie it in to the oil pressure of the motor ? since i have a big body lift ,, it allows me to stand the compressor up , and not even come close to the hood .. so i hope oil consumption will be a minimum ,,, i am thinking of an in line oiler , as well as a trap ... but i dunno yet ,, it is bracketed to the top of the alternator ,, and cross braced from the power steering bracket ,,, with adjustment at the brace ,, for the belt .. dont have the belt on yet ,, but picked one up today .... will start the plumbing to the tanks soon ...
as many of you know ,, i have sold my house ,, and am currently living in my shop ,, waiting to close on our new house ,, so ,, i cant work on motorcycles , with the r,v, in the shop ... mias well work on the bronco !!!!!
 

Attachments

  • air1.jpg
    air1.jpg
    47.5 KB · Views: 156
  • air2.jpg
    air2.jpg
    43.8 KB · Views: 102
  • air3.jpg
    air3.jpg
    49 KB · Views: 107
  • air4.jpg
    air4.jpg
    37.8 KB · Views: 134
  • air5.jpg
    air5.jpg
    34.6 KB · Views: 87
  • air6.jpg
    air6.jpg
    44.3 KB · Views: 123

supermottl

Bronco Guru
Joined
Feb 18, 2002
Messages
2,360
Loc.
Indian Harbour Bch,
you can do a search for my name and a post will come up with my settup. very simiar to your, but I laid mine down. I have no real oil issues, I just use an inline filter/separator. I got all my accesories from Kilby. they we OK. they had me call back to place my order because of a "team meeting"???????
 

snipes243

Bronco Guru
Joined
Oct 12, 2006
Messages
1,317
Loc.
Huntersville, NC
Did you make the bracket to mount the engine. I have a york sitting in the garage waiting to go once i figure out how to mount it.
 

flousberg

Sr. Member
Joined
Apr 28, 2002
Messages
774
You don't need/want an inline oiler. They have a crankcase for oil. Just bend a piec of wire and put a mark at 1" from the bottom. Fill it up and watch it to determine how much oil it consumes.
 

marc

Full Member
Joined
Jan 7, 2007
Messages
154
Loc.
milwaukie,or.
ok folks what do you think ? any one got an ingenious idea for the oil on one of these york compressors ? dipsticks ? tie it in to the oil pressure of the motor ? since i have a big body lift ,, it allows me to stand the compressor up , and not even come close to the hood .. so i hope oil consumption will be a minimum ,,, i am thinking of an in line oiler , as well as a trap ... but i dunno yet ,, it is bracketed to the top of the alternator ,, and cross braced from the power steering bracket ,,, with adjustment at the brace ,, for the belt .. dont have the belt on yet ,, but picked one up today .... will start the plumbing to the tanks soon ...
as many of you know ,, i have sold my house ,, and am currently living in my shop ,, waiting to close on our new house ,, so ,, i cant work on motorcycles , with the r,v, in the shop ... mias well work on the bronco !!!!!

MR I
i'm curious how much body lift you have to be able to stand the comp. upright.
marc.
 
OP
OP
mr incredible

mr incredible

Bronco Guru
Joined
Feb 25, 2007
Messages
2,217
Did you make the bracket to mount the engine. I have a york sitting in the garage waiting to go once i figure out how to mount it.

yes , i made a bracket , that mounts on the cross bolt for the alternator ,, it swivels there , for belt adjustment ... and fits on both sides of the pump , and uses all 8 bolts . to mount it ......
 
Top