• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Door Hinge replacement recommendations

Silverhorse

Bronco Guru
Joined
Aug 25, 2006
Messages
1,029
Loc.
Pensacola
Well I tried the JBG rebuild kit on my hinges and it didn't seem to help much so I'm ordering new ones, probably removable. Any recommendations? Thanks
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
I would take the hinges to a machinist and ask him to drill each hole for a larger pin with a bronze bushings. Got to be cheaper than aftermarket.

Ben
 

ElkhartBronco

Full Member
Joined
Sep 3, 2007
Messages
221
Loc.
Cedar Bluff
Door Hinge replacement

Being a journeyman toolmaker and a bronco fanatic does have it's perks.
I've been rebuilding door hinges for just about anyone i can for the longest time by drilling them out and replacing the pin with a larger one.
Total time for me to re-tap holes clean up the hinges and drill and ream them usually only takes an hour or so. Most definitely a cheaper alternative!
 
OP
OP
Silverhorse

Silverhorse

Bronco Guru
Joined
Aug 25, 2006
Messages
1,029
Loc.
Pensacola
Being a journeyman toolmaker and a bronco fanatic does have it's perks.
I've been rebuilding door hinges for just about anyone i can for the longest time by drilling them out and replacing the pin with a larger one.
Total time for me to re-tap holes clean up the hinges and drill and ream them usually only takes an hour or so. Most definitely a cheaper alternative!

I'm all for that but I tried they JBG kit with no luck any suggestions on that?
 

mudstud

Contributor
Bronco Bonehead
Joined
May 19, 2005
Messages
1,517
Loc.
Excel
Just a thought, have you checked to see if the doorpost or something else may be your problem? I used the JBG rebuild kit and it fixed some of the slop but I still had movement on the driver’s door. Taking a closer look, it seems to me that I have termites in my door.
 

302fix

Sr. Member
Joined
Aug 17, 2004
Messages
495
I had a machine shop do my JBG rebuild kit and it is snug as a bug.
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
I don't know how you went about redrilling the hinges for the kit? But if you did not have a machinist do it for you, you likely didn't get tight enough tolerances to take the slop out even with the new pin. Also your hinges may have already been worn out past the tolerances of the new pin that came with the kit. So I would look at having them drilled by a shop.

If this is just and excuse to buy new ones then by all means get er dun! I have been eyeballing the shiny set from Wild horses but man is it high dollar. I don't have any bias on any of them other than the ones that wild child sells and I would avoid those hinges completely.

Ben
 
OP
OP
Silverhorse

Silverhorse

Bronco Guru
Joined
Aug 25, 2006
Messages
1,029
Loc.
Pensacola
The play in my rebuilt hinges doesn't "seem" to be a pin issue. Looks like the hinge is worn where it rides on itself in the middle.
 
OP
OP
Silverhorse

Silverhorse

Bronco Guru
Joined
Aug 25, 2006
Messages
1,029
Loc.
Pensacola
Anybody have the duff's, Wild Child removable or Tom's quick release removable?
 
Last edited:

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
I have the Wild Child. They are good and the cheapest "aftermarket" soluton. The SS set available is pretty sweet however...but it is $$. I do like the lift off hinges as opposed to standard hinges. Good luck with your decision.
 
OP
OP
Silverhorse

Silverhorse

Bronco Guru
Joined
Aug 25, 2006
Messages
1,029
Loc.
Pensacola
How tight are the removable? Seems like they would need some play to remove them easily. I want some that are TIGHT and hard to remove;D
 
Last edited:

Broncmobile

Jr. Member
Joined
Apr 16, 2008
Messages
50
Loc.
Central Oregon
I rebuilt my hinges about five years ago. They started to get a bit sloppy so I ordered the stainless hinges from Tom's. Those arrived yesterday and appear to be top notch. I will put them on this weekend as I am in the middle of replacing my second clutch in a month!
 
OP
OP
Silverhorse

Silverhorse

Bronco Guru
Joined
Aug 25, 2006
Messages
1,029
Loc.
Pensacola
I rebuilt my hinges about five years ago. They started to get a bit sloppy so I ordered the stainless hinges from Tom's. Those arrived yesterday and appear to be top notch. I will put them on this weekend as I am in the middle of replacing my second clutch in a month!

Yes the stainless are very Nice! I'm thinking about that option also;D
 
Top