• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Big Tires, Little Lift. -- I want pictures!

67EB_in_619

Bronco Guru
Joined
Mar 6, 2003
Messages
1,870
Loc.
San Diego
Guys.. I am looking for some solutions and pictures for how people are fitting 37"+ tires into a bronco with 2"-3.5" lift... the lower the lift the more I want to see it.

How much sheet metal is cut off...

I want to SEE what it takes to get ground clearance without high center of gravity.
 

cgbexec

Bronco Guru
Joined
Sep 19, 2006
Messages
2,071
Loc.
Naples, FL
These are 35s with a 3.5" Jeff's Bronco Graveyard (Bullit Proof) and a 1" body lift to clear the NV3550 trans. I could easily clear 37s with this set up. The flairs are standard.

76Bronco.jpg
 

OsideDave

Sr. Member
Joined
Nov 18, 2006
Messages
886
Good thread, lets see some pix. This is one of my long term goals on the bronco - 37s w/ 3.5 lift max, no body lift either.
 

Dusty

Bronco Guru
Joined
Jun 28, 2001
Messages
2,969
Hey Matt you remember Coco right, here she is on 37" MTR's with the same 2-1/2" lift and no body lift (but with FW axles). Front inner fenders are gone, the rear inner fender flanges are trimmed.

I may wind up putting a 1" body lift on it for other clearance reasons but if it was just the tires I would try to get away without it. More pics of Coco and a few others in a similar thread here.

Dusty
 

Attachments

  • DSCN9505.jpg
    DSCN9505.jpg
    128.1 KB · Views: 382

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
Dusty, you know that everybody who reads that is going to start asking for the details that you're hesitant to show off pictures of! Maybe you could email some detail photos to the various interested members? (I'd be very interested in seeing how much clearancing you did for the tires, as well as detail pics of your front suspension. My FW Axles and most of my suspension is sitting in a pile under a tarp and 2 ft of snow in my back yard right now...)
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
Big tires, little lift

Here is one of mine. 2.5 BC bronco lift, 2" body lift for the ZF tranny and the Gorilla warflares. Rims are a 16x8.5"

Works like a charm.

Ben
 

Attachments

  • baylees bearly nice 003 (640 x 480).jpg
    baylees bearly nice 003 (640 x 480).jpg
    57.2 KB · Views: 283

broncbuster

Sr. Member
Joined
Jun 29, 2008
Messages
414
Here's a video. The copper/brown bronco has 3.5" lift, 2" body lift, lots of clearancing, 38.5 tires. near the end of the video he's playing on the hardest line on lee's rock in the robledo mtns at las cruces. you can see how it works.


http://vimeo.com/2246749
 

wildhorses76

Full Member
Joined
Jul 17, 2007
Messages
243
Loc.
Kaplan, Louisiana
Yeah me too! Wish there was places like that here in south louisiana....no rocks, only mud.....I'd rather go trailing out there than in the mud.....damn.....
 

broncomitch

Bronco Guru
Joined
Jan 17, 2008
Messages
2,384
Loc.
west jordan, utah
i dont know how to post pic's on heir but look at my gallery pic's. i clear my 38.5's by 2 inches. yupp i could run 40's on a 3.5 inch lift and 2inch body lift. i cut the front fenders out around were my fender flar was and alittle bit from the front botom corners in the back. the body lift was to fit my np205. :cool:
 

rjlougee

Bronco Guru
Joined
Dec 26, 2001
Messages
1,959
Here's one of my old rig. 101" WB, HP D60 front and Sterling rear, both 65" WMS, narrowed front end, 3" suspension lift and 2" body lift with 39.5 IROKs.
Joe
 

Attachments

  • DSC00066.JPG
    DSC00066.JPG
    60.3 KB · Views: 345

uncle ray

Full Member
Joined
Dec 8, 2006
Messages
165
mine is on a 2" susp lift and 1" body lift. only 35" tires right now, plan is for 37s. it already rubs the top of the rear inner fenders when flexed, something is going to have to change before i go with bigger tires, either bump stops or more cutting/raising the inner fenders. i'm hesitant to limit the flex at this point, but once i get more trail time i'll see. i might have to bite the bullet and install some bump stops. there are pics in my half-arsed build thread if you search my username.

the one in dustys pic is sexy!
 

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
Here's a video. The copper/brown bronco has 3.5" lift, 2" body lift, lots of clearancing, 38.5 tires. near the end of the video he's playing on the hardest line on lee's rock in the robledo mtns at las cruces. you can see how it works.


http://vimeo.com/2246749

HMMM, seems like I saw an add on the Phoenix Craigslist for that exact copper/brown bronco not too long ago.

Man that looks like fun. I wish I hadn't brought my Ranger to Phx for Christmas now.....
 

ep67bro

Contributor
Bronco Junky
Joined
Aug 28, 2008
Messages
3,873
Loc.
Easton, MD
I dont know how you guys do such big tires with a little lift and still wheel your trucks? I have a 3.5" lift cut fenders and only 33 x 12.5" tires and I still rub the rear fender flares when I have it really flexed out.
 

Dusty

Bronco Guru
Joined
Jun 28, 2001
Messages
2,969
<snip> rear fender flares <snip>

There's your problem. Get rid of those,and a few more inches of sheetmetal where they were attached. Then take the sawzall to the inner fenders too...;D

Dusty
 
Top