• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

TIG welding tips?

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
I know that there are many out there with alot of hours doing TIG welding on all types of metals..

Share your set-ups and tips TIG welding mild steel, stainless steel and aluminum....
I have to ask because everyone will have a different set-up for a procedure.
 

Dave

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
2,264
Mad,

This is one of the best DVDs on TIG I've seen. www.covell.biz

I have a Thermal Arc Pro-Wave 185 TSW. Very pleased with the machine. It's very versitile and easy to program. I bought it for aircraft work and its a perfect size and portable for that application. Sometimes I wish it were bigger. Kinda like having a 180 amp MIG. I do need to invest in a water cooled torch.

Biggest tip I can give is CLEAN everything. Correctly pointing the tungstun will make a nicely focused and nonwandering arc. Too little gas flow yields contaminated welds. Too much gas flow yeilds contaminated welds. If you are planning on welding cages, bumpers, suspension parts, etc go with something in the 250 amp range and water cooled. Let me know if you have any specific questions and I'll answer if I can.
 
Last edited:

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Big window auto darkening helmet.
Do it indoors out of the wind.

I am too much of an amature to give other advise.
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
I am also an amateur but as this is free and should be taken as worth what you paid. There is a lot of guys on here that are pros but I thought you might like an amateur's input. So here it is. Clean, clean, clean. Use as little heat as you can and still get good penetration. make a puddle, add a little rod, move back, move foreward, make a puddle, add rod repeat. Do not dip your tip into the puddle but if you do stop and grind a new point. I use a flow meter at 15-18, argon. I couldn't figure out why my welds were getting bubbles in them but once I lowered the amps the bubbles went away. I think I was vaporizing the metal? If you hold the arc on a ball of molten steel it will flatten out like an egg and flow with the base metal. No need to hurry just control the amps.
Like I said above take it for what it's worth, it may all be wrong.
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
I think majority of my problems is TIG welding outdoors in our warm weather.
I can't weld up a rack or cage in my living room, for smaller items I'll do pretty good.
I know about cleaniness with aluminum and tunsten tip preperations. I realized I ran out of gas after blowing out about 2" of 2% ceriated tunsten and several times sharpening while welding up a mild steel pipe rack.
 

Dave

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
2,264
I think majority of my problems is TIG welding outdoors in our warm weather.
I can't weld up a rack or cage in my living room, for smaller items I'll do pretty good.
I know about cleaniness with aluminum and tunsten tip preperations. I realized I ran out of gas after blowing out about 2" of 2% ceriated tunsten and several times sharpening while welding up a mild steel pipe rack.

Build yourself a welding tent.

I got a tank of contaminated gas awhile back. Probably a mismarked 75/25 Argon/CO2 tank. Burnt off electrodes like crazy and couldn't control the heat.

Just something to be aware of.
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
Funny you mension the bad tank, I actually got 2 tanks of compressed air marked CO2/Argon, it was kind of a challenge to diagnose.
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
TIG welding in the rain doesn't help much also.....
Can't get a break in this off and on drizzle....%)
 

Attachments

  • DSC05481.jpg
    DSC05481.jpg
    130.5 KB · Views: 110

Wyflyer

Bronco Guru
Joined
Apr 1, 2008
Messages
2,920
If welding aluminum, remember it is very sensitive to contamination. It's like God tried hard to invent something we couldn't weld, but we did it anyhow;)
Don't grind it to clean it up because it will imbedd the crap into the metal. Use a die grinder rasp or a stainless steel brush or even a chisel. Chemical clean it first. With aluminum remember the A's... Aluminum=AC current & Argon. I don't recall the proper tungsten, but you want to melt it into a ball before you strike on the aluminum.

Stainless is much easier to weld, Grind the tungsten to a point. It likes argon too but will also work with an Argon/CO2 blend. It's not so difficult to clean as aluminum since aluminum gets a martensite zone (or shell) on the metal that must be removed.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Don't know if it is right, but I have had good luck cleaning aluminium with scotchbrite pads (new ones).
If I remember right, Aluminium should have pure tungsten, green band. (now see if I am corrected)
 

Dave

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
2,264
Don't know if it is right, but I have had good luck cleaning aluminium with scotchbrite pads (new ones).
If I remember right, Aluminium should have pure tungsten, green band. (now see if I am corrected)


Scotchbright works well. I usually clean the parts with a degreasing soap and brush the weld area with a stainless brush or wheel that is only used for aluminum. Then Scotchbright with aluminum cleaner. Aluminum/mag wheel cleaner works pretty well or you can use the official cleaners like Arcal Weld-O. Or you can mix a little oxalic acid in distilled water in a spray bottle. A quick wipe down with acetone and let the surface dry. If the rod has been laying around I wipe it down with scotchbright and acetone also. A clean pair of gloves for the actual welding also helps. I like Zirconiated (brown) electrodes for aluminum. Cleaner starts and a more stable arc than pure tungsten. It's really a fun process and easy to get very professional welds when things go right. When they go bad they really go bad.

I've never seen TIG with a Argon/CO2 mix. I know I had horendous problems when I got a tank of mixed gas by mistake. Very contaminated welds, rapid electrode deteriation, and poor arc stability. I've seen Argon, Argon/He, pure He, and Argon/H2 mixes.
 
Last edited:

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Scotchbright works well. I usually clean the parts with a degreasing soap and brush the weld area with a stainless brush or wheel that is only used for aluminum. Then Scotchbright with aluminum cleaner. Aluminum/mag wheel cleaner works pretty well or you can use the official cleaners like Arcal Weld-O. Or you can mix a little oxalic acid in distilled water in a spray bottle. A quick wipe down with acetone and let the surface dry. If the rod has been laying around I wipe it down with scotchbright and acetone also. A clean pair of gloves for the actual welding also helps. I like Zirconiated (brown) electrodes for aluminum. Cleaner starts and a more stable arc than pure tungsten. It's really a fun process and easy to get very professional welds when things go right. When they go bad they really go bad.

I've never seen TIG with a Argon/CO2 mix. I know I had horendous problems when I got a tank of mixed gas by mistake. Very contaminated welds, rapid electrode deteriation, and poor arc stability. I've seen Argon, Argon/He, pure He, and Argon/H2 mixes.

That's a new one. Never heard of mixing Hydrogen into a weld mix. I am guessing it is there as a de-oxidizer? What kind of percentage it is? I bet it is real low
 

Dave

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
2,264
That's a new one. Never heard of mixing Hydrogen into a weld mix. I am guessing it is there as a de-oxidizer? What kind of percentage it is? I bet it is real low

15% H2. It's mostly used in automated processes on light gauge stainless. It allow much faster welding speeds with less undercut. The book says you can use 5% H2 for cleaner appearing welds on stainless. I think its used for cosmetic welds. Probably on appliances and such. Never played with it.
 

fordtrucks4ever

Bronco Guru
Joined
Oct 8, 2006
Messages
1,280
Loc.
DFW
Wasnt the Hinderburg filled with hydrogen? BTW, Chuck that is some very good sound advice. The best up so far.
 

fordtrucks4ever

Bronco Guru
Joined
Oct 8, 2006
Messages
1,280
Loc.
DFW
I think majority of my problems is TIG welding outdoors in our warm weather.
I can't weld up a rack or cage in my living room, for smaller items I'll do pretty good.

Its no better welding outside in cold weather.;D But why are not burning those in with a Mig?. TIG is so time consuming. Some advice I can ad further is make sure you can gas weld very well before tig welding. It totally make a difference. I dont like auto darkening hoods, but each to their own. If you have any trouble seeing, this can help. Make sure you dont have any lighting behind you. Use a floodlight or droplight facing away from you down at the work area. Allow your eyes to adjust before striking an arc. For welding aluminum, all you can do is practice, practice, practice. I was taught to weld gum wrappers. After that everything else was a piece of cake.
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
Its no better welding outside in cold weather.;D But why are not burning those in with a Mig?. TIG is so time consuming..
Yeah but it's a rack on my truck. For the others I'll MIG it.
Gas welding was the first process I learned in high school. My sister would wonder why all her coat hangers were disappearing as I built projects. My original swivel bike was built using oxy/acet and coat hangers.
I used the TIG to mock up the ladder rack on the utility truck because of less splatter and then decided to do the whole rack in TIG.
 

DRBRONCO69

Chicago Mike
Joined
Jul 26, 2006
Messages
2,146
Loc.
Chicago, Illinois
I purchased an HTP Inverta-tig for our shop. With the welding needs and the new technology on OEM vehicles, welding aluminum is a must. I love my welder, but I definitely could use some more practice. If there is any advice I can give, clean,clean,clean! Have patience. Go slow. It is very time consuming. If what you want to weld is aluminum, tig looks great. But for speed, a spool gun on a MIG is unbeatable ( IMO ).
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
I like to see your baseline set-ups.
Like for building rollcages. 3/32 tunsten, 3/32 filler rod. etc. etc.

I now have my own Miller Diversion 165 TIG unit so I can play. Usually I would be trying out someones unit which is all set up for the process.
 

Dave

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
2,264
I had good luck with this setup on some .120 DOM.

1/16 Troiated
12 cubic feet per hour Argon
3/32 wire
DC electrode negative
preflow .1 sec
60% pulse width - peak current 125 amps - background current 50 amps - 1 Hz.
Post flow 6 seconds.

This was off the setup card.

non-pulse called for 20 amp hot start and 125 amps welding.

If you need to extend the electrode a bit to get into the tight side of an angle use a gas lense and a little higher flow.

I'm not an expert welder and still practicing. I did work as an engineer for several years at the Rocky Flats Nuclear Weapons plant developing control systems for automated welding processes and learned quite a bit about the process. Most of it was electron beam and GTAW process to weld stainless, vanadium, and some other exotic materials. That and the experience growing up in my Dad's machine and welding shop are giving me some pretty nice results. We didn't have TIG back then by I could really gas weld. Just wish I had the steadyness and finger dexterity of my dad. That man can weld.

I'm drinking decaf this morning as I plan on doing some welding today. I need to get comfortable and brace myself for a nice steady bead. Not a good off hand shooter either.

I also noticed that the bead really starts folwing nicely after welding for a inch or so. A little preheat helps me get a nice flow from the beginning. I think it would also help normalize the weld site on a cage.
 
Last edited:

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
For cleaning aluminum, I use the hydroflouric acid AC condensor cleaner that I buy at the local HVAC contractors supply for about 8 bucks a gallon. Same 'pink' stuff as the prep solution you can buy at any welding supply but far stronger and way cheaper.

Another key to welding aluminum properly that has any mass to it is to preheat it to several hundred degrees before starting the first bead.

If your machine has a pulse feature, that makes welding aluminum sheet (like for fuel cells and the like) really smooth..but it takes some practive to get your two-handed 'pool/stab/move' technique in synch with the pulse timing. Once you do, that is how you get the nice 'overlapping' dimes' appearnace in the weld. As noted above, tht works very well for thin steels too.

I have two TIG setups..the Esab 252 that is the main shop machine and a Thermal Arc on the mobile rig. The Thermal Arc does not have remote control of amperage level...bit tricky for welding aluminum since you have a fixed amperge and so you start slow and finisih quick.
 
Top