• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Mint 400 pics

OP
OP
bigjhoov

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
Weren't sure. They said they never felt it during the race though.
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
not putting words, just saying how you sound.

imagine if you asked me what size engine im running and all i responded with was im running whats legal.

his engine is not legal, its not like anyone cares anyway, look at the atk jeep that won the thousand.
The wheel base is 4" wider and 2" longer than stock per SCORE rules. I am running ford 9"s in both ends also SCORE legal. I am running a 351W with stock EFI that is also SCORE legal and Coil overs. I checked with SCORE on all of the above. As far as I know everything is SCORE legal on my racer, if I find out something is not I will change it. We finished 3 laps and had 5 flats, ran out of spares. PS the problem turned out to be a bad plug wire.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
The wheel base is 4" wider and 2" longer than stock per SCORE rules. I am running ford 9"s in both ends also SCORE legal. I am running a 351W with stock EFI that is also SCORE legal and Coil overs. I checked with SCORE on all of the above. As far as I know everything is SCORE legal on my racer, if I find out something is not I will change it. We finished 3 laps and had 5 flats, ran out of spares. PS the problem turned out to be a bad plug wire.

i was wondering how wide you can go, is it measured outside sidewall to outside sidewall? do you know if a full width axle and 15x7 wheels might just be narrow enough?

about the engine, not that i or anyone else cares but technically a windsor is not legal, it never came in a eb or was it ever an option.

Engine must be of the same manufacturer basic design & type & have the same number of cylinders as the one installed by the manufacturer. Any displacementengine may be used as long as the original block casting remains the same.

quote from 2006-2010 score rule book.

technically its not a casting ever factory offered by ford. but like i said no one really cares. especially me after the atk jeep won the thousand.
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
See below
i was wondering how wide you can go, is it measured outside sidewall to outside sidewall? do you know if a full width axle and 15x7 wheels might just be narrow enough?

The full width is 6.5" wider than the EB housing so I don't tink you can get enough offset topush the tires in that much but maybe with 18" rims maybe assuming the hubs don't stick out too much. I just took a stock EB housing and added 4", later I had a ford 9" housing built to match that.

about the engine, not that i or anyone else cares but technically a windsor is not legal, it never came in a eb or was it ever an option.
I questioned SCORE about this also, they say"same engine family which includes the 351w"

Engine must be of the same manufacturer basic design & type & have the same number of cylinders as the one installed by the manufacturer. Any displacementengine may be used as long as the original block casting remains the same.

quote from 2006-2010 score rule book.

technically its not a casting ever factory offered by ford. but like i said no one really cares. especially me after the atk jeep won the thousand.
 

needabronco

Bronco Guru
Joined
Jul 2, 2004
Messages
6,411
Loc.
Prescott/Farmington
Chuck that's how I read the rule book aswell. I am pretty sure the spirit of the rule is that they don't want you running an 'aftermarket' block or running a different make engine (chevy engine in a ford..) That's how the rules are written for rally cars also.

And I'm not exactly an expert, but I could swear I read somewhere that a 351W was offered in 1, maybe 2 ford vehicles stock%)
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
Chuck that's how I read the rule book aswell. I am pretty sure the spirit of the rule is that they don't want you running an 'aftermarket' block or running a different make engine (chevy engine in a ford..) That's how the rules are written for rally cars also.

And I'm not exactly an expert, but I could swear I read somewhere that a 351W was offered in 1, maybe 2 ford vehicles stock%)

the idea with the engine rule is that you run what came in that truck, or close to it in this case. i always figured a windsor wasnt totally leagal in an eb, because it never came in it and is quite an advantage. got to think about the poor guy in a jeep, he might have a problem. i 302 block that can be safely made to displace 347 and some question that, now a 351 block can safely displace 430ish ? thats almost a 100 cubes difference and more than 25% increase in displacement.

as for saying all they want is you to not put a chevy in a ford or a aftermarket block is definitely not true, im sure chuck would get in trouble if he showed up with 460 even if it was stock. and thats a stock engine offered by ford in a ford.

like i said im not woried about the rules, i cant race score, weighed the truck last night with light rack and spares and fuel it weighed over 4500 pounds. still needs a bunch of little stuff and tools and spare drive shaft. doubt it wont weigh less than 5000 with 2 people.:-[
 

BroncoJAK

Bronco Guru
Joined
Sep 24, 2002
Messages
2,813
the idea with the engine rule is that you run what came in that truck, or close to it in this case. i always figured a windsor wasnt totally leagal in an eb, because it never came in it and is quite an advantage. got to think about the poor guy in a jeep, he might have a problem. i 302 block that can be safely made to displace 347 and some question that, now a 351 block can safely displace 430ish ? thats almost a 100 cubes difference and more than 25% increase in displacement.

as for saying all they want is you to not put a chevy in a ford or a aftermarket block is definitely not true, im sure chuck would get in trouble if he showed up with 460 even if it was stock. and thats a stock engine offered by ford in a ford.

like i said im not woried about the rules, i cant race score, weighed the truck last night with light rack and spares and fuel it weighed over 4500 pounds. still needs a bunch of little stuff and tools and spare drive shaft. doubt it wont weigh less than 5000 with 2 people.:-[

Sorry, I'm butting in where I don't belong.
 
Last edited:

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
I didn't think it right either when I first heard of using the 351w and thast is the reason I called score. I run about 450 hp and some of the other guys are running 600 plus so I don't think anyone will complain about me having too much. If I every lose a protest I'll build a big HP 302. But if you want to talk about advantage/disadvantage compare the EB's 92" wheel base to the 108 of everything else we race againist
 

coachbarnes

Bronco Guru
Joined
Aug 3, 2001
Messages
2,717
Loc.
Franktown/Breck, CO
SCORE rules (or rule enforcement) are a joke. They are extremely subjective, and always up for debate. The only thing SCORE inspects are the safety aspect of the racer (cage, etc). They don't get out and measure wheelbase or check engine blocks. The only way someone gets "caught" if they choose to build outside the subjective rules, is if someone protest. In our class, there isn't any real prize money at stake so who is going to put up a bond to protest a "potential" violation, especially when the rules allow 15 interpretations? Personally, I would never protest in my class because I never felt like it was "me against them" -- it's "me against Baja" -- I couldn't care less what anyone else runs..I just want to finish the race. As far as Chuck goes, I will tell you that I KNOW he stays within the rules as he interprets them, and suggesting otherwise isn't too cool in my opinion.

By the way -- I'm the only one running 600+ hp engine, and I can tell you that it is certainly no advantage -- in fact, just the opposite. It was a rookie mistake putting that much HP in my little SWB 4x4. It cost way too much in fuel efficiency, which has forced me to completely re-work everything this year to make room for a larger fuel cell. But I did it, and did it within the rules as I interpret them (and verifying with several calls to Savage). Doesn't mean someone won't have a different interpretation, but have your facts if you want to call me out as a cheat in public.

didn't mean to rant...
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
I think Dan is also running about the same HP as you. I also think Don is running more than he will admit to also. Pike passed me like I was backing up in the mint on a long straight away. But even with all that power we were running 2ed a couple of times
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
I am told that Hawaii Racing built his engine. The Moss brothers are not only good, and lucky but nice guys. At the Mint Don offered me a spare but it wouldn't fit.
 

NicksTrix

Bronco Guru
Joined
Aug 1, 2001
Messages
6,410
chuck, how come his spare wouldn't fit? do you two runa different offset that wouldn't clear?
glad to see you get some good hard test miles on the racer & team.

scott, can't wait to se you back out. hear things are looking better on the truck.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
i never meant to say chuck was out of the rules, the motor comment was a joke because i know im probably the only eb built to go fast in the desert without a windsor hahaha

it was that guys response, i saw his front end was wider and by the looks of the width, similar to cervantes i thought, i just figured it was full width.

but when i ask "is chuck running a full width axle?" and the response is, "he is running whats legal" it comes across as suspicious like he doesnt want to really answer the question.
 

coachbarnes

Bronco Guru
Joined
Aug 3, 2001
Messages
2,717
Loc.
Franktown/Breck, CO
chuck, how come his spare wouldn't fit? do you two runa different offset that wouldn't clear?
glad to see you get some good hard test miles on the racer & team.

scott, can't wait to se you back out. hear things are looking better on the truck.

That's two of us Nick! I'm not getting any younger, so taking a year off sucks! ;)
 

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
Cool pics. Was Vanna there this year? ;)
attachment.php
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
I don't know, she didn't come by my pit and say Hi so I guess she was a no show:)
Nick, we both use 5/8" studs but the Moss wheels use a acorn type nut and mine use a flat flange type. The flat part of his rim is sloped to the center and I need a flat surface.
68ford, I think bigjhoov just didn't know how wide my truck is and didn't want to guess. The rule says must be stock track width +-4". I will push the limit but it isn't worth cheating to win because I would always wonder if I could win without cheating, anyone can cheat.
 
Last edited:
Top