• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Shifting problems with D20 J-pattern??

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
Hey All-

I am having a hard time engaging/shifting from 4L or 4H back to 2H.
i have the 302-> NP435->Dana 20 (backwards J shift pattern) and i have a helluva time getting it back into 2H. as a matter of fact, this weekend when i was out playing i was able to finally get it into 2H when the truck was off. once it was in, the truck wouldn't move when in forward or reverse gears.

Now, it sits in neutral i think because when i push it as far as it goes it just slowly fallls down again (into neutral?).

i have tried rocking the truck slowly, trying to shift with the tranny in gear (but clutch pushed in) and i cannot seem to get it back into 2H.

Help!
 

zeeman1

Bronco Guru
Joined
Apr 27, 2008
Messages
1,268
Loc.
Seattle
Those things are a pain,. but slowly rolling backwards has been the only consistant way I have been able to shift mine. Twin stick it and you'll be happy you did every time you go to shift.
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
What he said. As well, when you are done with 4 wd and the hubs are unlocked back up again a good 15-20 ft to ensure that the hubs have totally disengaged.
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
thanks guys- this will sound dumb, but can you explain the twin stick i hear so much about? is it a totally new TC?
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
No, same tc. The stock J-shifter uses a single post on the end to engage two shift rails. One rail for the front drive and one for the rear. A twinstick has two levers each with their own post to move the rails independantly. You end up with two sticks that only move forward and back.
 

RRRough74

New Member
Joined
Apr 18, 2009
Messages
12
Loc.
Seattle
I have the same setup as Bundy and the same exact thing happens with my 74. I was recently out wheelin with my mechanic and he thought that it could also have to do with heat and expansion in the diff. To test what I thought was a bs theory, we let my rig cool for awhile and sure enough I was able to get it from 4L to 2H.

He also thought that running RedLine in the Diffs might help with the heat issue. He is a generalist though and you guys are the EB pros. Do you think he was right or is it worth just going to the twin sticks regardless? Also, is this a relatively inexpensive mod? I am assuming it is but open to feedback.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I have the same setup as Bundy and the same exact thing happens with my 74. I was recently out wheelin with my mechanic and he thought that it could also have to do with heat and expansion in the diff. To test what I thought was a bs theory, we let my rig cool for awhile and sure enough I was able to get it from 4L to 2H.

He also thought that running RedLine in the Diffs might help with the heat issue. He is a generalist though and you guys are the EB pros. Do you think he was right or is it worth just going to the twin sticks regardless? Also, is this a relatively inexpensive mod? I am assuming it is but open to feedback.

The only thing the diffs have to do with shifting the tcase is possible binding (torque) of the driveshafts. With the J-shifter your trying to move both shift rails at the same time. If they're bound up it's difficult or impossible. Driving backward will release the tension and allow the shifter to work. With the twin stick you only move one shift rail at a time so it's easier to do and you don't have to back up. Once one side is released the other is easy to re-select.

Twin sticks are somewhere around $150 but some folks have also made their own. With the J-shift tcase you'll need to trim the flags on the end of the shift rails to get them to work independantly. You can do it without removing the tcase. A T-shift tcase needs to be removed and completely disassembled to get the same results.

In short it's one of the best mods I've done to my Bronco and I'd do it again without thinking about it.
 

RRRough74

New Member
Joined
Apr 18, 2009
Messages
12
Loc.
Seattle
Officially adding this mod to the list. It will fall somewhere between rear discs and rear ARB. Thanks for the great explanation.
 

zeeman1

Bronco Guru
Joined
Apr 27, 2008
Messages
1,268
Loc.
Seattle
Good choice, you get a good bang for your buck with this one, plus the more shifters the better I say.
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
great info, although i drove about 60 miles with my TC in neutral :(

my TC and NP435 are both seeping fluid, and actually some gear oil came up from the boot onto the cabin floor while i was romping in the desert... not sure which stick it came from cause they are both suspect.

How hard is a basic rebuild on the D20? it is probably just seals, but if i pull it anyway i will def do the twin stick mod
 

zeeman1

Bronco Guru
Joined
Apr 27, 2008
Messages
1,268
Loc.
Seattle
If the TC is in neutral your not driving anywhere, you'd have to be in gear. If you went 60 miles I'd assume You've got it in 2wd.
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
phew, that makes me feel better but shouldn't the stick be "locked" into place if i was in 2WD? it moves quite freely over in the 2H side
 

ohpoo2

Sr. Member
Joined
Dec 21, 2005
Messages
885
There was someone recent that had the same trouble It sounds like the shifter to me have had it happen on a couple and have a good j shift that has no problems. If the shifter tries to twist in any way instead of staying in the j pattern I would say its that.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
phew, that makes me feel better but shouldn't the stick be "locked" into place if i was in 2WD? it moves quite freely over in the 2H side

Your shifter either has loose mounting bolts or it is just worn out.
 

mustangtoby

Bronco Guru
Joined
Nov 28, 2007
Messages
1,757
Loc.
southwest Colorado
X2 on the mounting bolts, mine was loos and wobbly. Tightened a couple of bolts, now tight and works great. 2 Bolts, one goes through and has a nut on the other side, one screws into the tranny adaptor.
 

jpopsbronco

Full Member
Joined
Aug 30, 2008
Messages
269
Loc.
Irvine, CA
Twin stick clap clap clap twin stick clap clap clap. My bronco has a money black hole in the rear end, sounds like yours is in the trans/tc haha. You gonna go to big bear ryan?
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
yessir, as soon as i get my cooling problems under control. i tried to just make it UP to big bear and i overheated badly... a new thermostat helped but i need to flush my radiator and make sure it's not all clogged up.

ahhh, the life of an EB owner...
 
Top