I was under the impression that the motor mounts had to be moved.
If you start with a six it fits in the same frame horns.
Looks like you had to take some out of the crossmember for clearance.
Took out too much at first, we'll just fit the piece we removed back in just a little lower.
What other issues do you forsee, clutch linkage, radiator mounting, etc.
Clutch linkage we'll use 302 stuff don't see any reason it won't work, if it doesn't we have the F-series bellhousing that uses the external slave cylinder. Radiator will be moved forward about an inch. Throttle linkage is a snap since the little 170 uses a cable already.
When we're finished I'll make up a few extra sets of frame horn mounts.
Steve