• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Installing a windshield

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,620
Loc.
Ringwood, NJ
Just got a windshield, I have the gasket and the wire/wd40 to put it in. I have the trim that goes around the outside of the glass, my question is do you put the molding in first or do you put it in after the windshield is installed in the frame?
 

surfer-b

Contributor
Bronco Guru
Joined
Sep 7, 2006
Messages
3,013
If you are talking about the al. trim:
1: Install glass into gasket
2: install al trim into gasket with glass in place
3: install all as one into window frame
If you are having trouble with the gasket fitting correctly in the corners you may have to get another, I had 1 that didn't fit worth a crap, purchased another from the same vendor and it fit perfect.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
If you are talking about the al. trim:
1: Install glass into gasket
2: install al trim into gasket with glass in place
3: install all as one into window frame

X2 - always put the trim in the gasket before installing on the vechicle. It is nearly impossible to get the trim on once the glass is in place.
 

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
I was told on the old 60's fords you dont need to use a sealer but it wouldent hurt right?
 
Top