• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

custom bumper and tire carrier pics

ochretoe

Sr. Member
Joined
Feb 23, 2005
Messages
802
Loc.
Millington
I need pics or links to some custom bumpers with tire racks. I am going to have one made by a friend and need some ideas to show him. If you have pics in your gallery let me know and I'll look them up. Thanks
 

tennessee toy

Full Member
Joined
Mar 27, 2009
Messages
299
Loc.
Dyersburg, TN
interesting. I actually was looking at the protofab site because i was thinking the same thing. I am looking to get a jerry can/cooler swing out done.
I live in Dyersburg. I would like to see what you come up with.
Do you work at Shelby Forest? I grew up in Millington.
 

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
Here's mine.
 

Attachments

  • IMG_0245 (Copy).JPG
    IMG_0245 (Copy).JPG
    118.1 KB · Views: 170
  • IMG_0246 [].JPG
    IMG_0246 [].JPG
    143.8 KB · Views: 167
OP
OP
ochretoe

ochretoe

Sr. Member
Joined
Feb 23, 2005
Messages
802
Loc.
Millington
deltarat, can you show me the latch on that bumper and what size tire is that, I run 33"? Thanks
 

marty

Sr. Member
Joined
Apr 18, 2008
Messages
867
Loc.
massapequa, n.y.
ok it seems that everyone that has fabricated a tire carrier uses a home made or aftermarket bumper. but what about us guys that like the original look of the chrome bumpers. i thought of a idea of removing the stock bumper and installing a length of box tubing through the u shape openings in the chassis and at the end do the spindle idea on one end. then just take and cut a u-shape opening where the spindle is on the chrome bumper and over lay the chrome bumper over the box tubing. all of the tubing is covered by the chrome bummper. i only run a 31" tire so it doesn't have to be crazy heavy duty but it should work well. just need the time to take measurements and see if my idea will work. any one else do this yet. lets see some stock bumper configurations.
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
I found some other pictures on my computer.
 

Attachments

  • PICT0108.jpg
    PICT0108.jpg
    129.6 KB · Views: 84
  • PICT0110.jpg
    PICT0110.jpg
    149 KB · Views: 125
  • PICT0109.jpg
    PICT0109.jpg
    148.7 KB · Views: 127

70EB

Bronco Guru
Joined
Aug 31, 2003
Messages
1,621
Loc.
Gig Harbor
Some pics of mine before and after paintjob. Simple setup that I purchased off a Bronco.com mailing list member from ND in 1999.
 

Attachments

  • DSC00141.jpg
    DSC00141.jpg
    117.1 KB · Views: 88
  • DSC00140.jpg
    DSC00140.jpg
    157.4 KB · Views: 150
  • finished_back.jpg
    finished_back.jpg
    91.9 KB · Views: 137
  • EB Roadworthy2.JPG
    EB Roadworthy2.JPG
    109.1 KB · Views: 91

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
deltarat, can you show me the latch on that bumper and what size tire is that, I run 33"? Thanks

I don't think I have a better picture of it. It is a 1" hard pin that goes through the 4" bumper and is welded on both sides with a hole in the end. There is a 1'" hole in the arm that slides over the pin and a hitch pin holds it on. You can adjust the pivot bearing to let the pin carry as much of the weight of the tire as you want. It is a 35" tire.
Let me know if you need anymore info or a better picture.
 

brian72

Early Bronco Student
Joined
Jun 18, 2001
Messages
4,157
oh - you wanted rear.....sorry, have not built that one yet.
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
that is what i was looking to do but what is supporting that frame something under the bumper. do you have pictures of your build on this bumper/carrier.

Behind the bumper is a piece of drawbar 1-1/2x3, it's drilled and tapped for 1/2nc plus there are some additional Drilled and tapped straps welded to it. These go into the frame horns so it has more than just 4 bolts holding it on. Everything else was welded to this and the stock bumper just fits over it. It may seam like overkill but the same drawbar used to be behind my stock front bumper and it won quite a few battles with other stupid drivers. I kinda like knowing it's back there keeping guard over my 23 gallons of gas.

I have more pictures but I haven't been able to find them, I'll post them when I do.
Steve
 

1971BroncoSport

Full Member
Joined
Dec 23, 2008
Messages
204
Front and Rear Bumpers

Here are my bumpers. Have since mounted winch on front, but this should give you an idea.
 

Attachments

  • 73 Front Bumper.jpg
    73 Front Bumper.jpg
    41.3 KB · Views: 44
  • 73 Rear Bumper.jpg
    73 Rear Bumper.jpg
    54.4 KB · Views: 85
Top