• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Crazy idea? 2" BL, Warflares and 35's?!?!

XT700

Sr. Member
Joined
Apr 11, 2002
Messages
797
Loc.
Brownsville
So here's the problem, due to the laws regarding lifted vehicles in my state it is unlikely I will be able to get the Bronco inspected another year. I am considering my options and one may be to pull the lift and try to run 35 inch tires with the Warflares to the body line and a 2 inch body lift. Currently I am running that with a 3-1/2 suspension lift and have a lot of clearance. This rig will see only mild wheeling no hardcore stuff. Can I make it work, expect I will need to trim inside the wheelwells but what other problems might I run into. Or is the whole idea crazy and I should just sell this one and start over. Really want to keep the 35's not drop down to 33's.

Thanks for any thoughts/suggestions.

Picture of current setup attached.
 

Attachments

  • b.jpg
    b.jpg
    83.6 KB · Views: 199
OP
OP
XT700

XT700

Sr. Member
Joined
Apr 11, 2002
Messages
797
Loc.
Brownsville
It is a bit strange, we are allowed a 30" bumper height(if you choose the proper vehicle class) but suspension modifications are not allowed. Either up or down, so technically no suspension lifted vehicles and no lowriders. For the most part law enforcement looks the other way but because Broncos are very unusual up here they get more than their share of attention. Jeeps and full size pickup within reason seem to get a free ride. 35's are really the largest tires we see on any rig driven on the street around here. The bigger problem is that if you have the vehicle inspected(required yearly) and the inspection station passes the vehicle and then you get stopped and ticketed they lose their inspection liscence, as a result it is difficult to get inspected.

Sorry, long winded but that is the reason for the question.
 

73EB

Sr. Member
Joined
Feb 21, 2010
Messages
534
Loc.
Bentonville, Ar
The only sensible thing to do is MOVE! Run away and never look back. How dare they get in the way of you and your right to a lifted bronco. Bastards! %)
 

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
Mine started out as a 2" BL and 35's...looked stuffed, so I went down to 33's. This weekend Jay and I are installing a set of locked axles along with a 3-1/2" suspension. I'm debating if I want to keep the body lift or go back to stock. Have to decide soon as I'll be tying the roll cage to the chassis...33's and a 2" BL don't look too bad, I'll post pics when I'm done with the lift...

Mass is similar though - 2-1/2" mechanical change, up or down, only.
 

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
Damn, i thought you lived in the US. Are they consulting Chavez on regulations? I think you'd be ok with the combo you mention. Originally I had 3.5 SL, no BL and 35"s, but my flares were much less aggressive. Around town should be just fine, but I wouldn't flex it out much, and be sure to roll the lip on fender when you cut it for the flares.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
how do they know how high is stock? i say install a 2.5" lift, barely noticeable. can you add some kind of extension under the bumper a few inches?
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
You get hassled for that? have you gotten pulled over with it Walt?
 

BroncoinAlaska

Sr. Member
Joined
Mar 26, 2007
Messages
509
Loc.
San Antonio, TX
Have 35" and only a 2" body lift with warflares. Waiting to put on the 3-1/2" monster suspension. It looks decent the way it sits and the rubbing is minimal. Its an option but will look better with the lift.
 
OP
OP
XT700

XT700

Sr. Member
Joined
Apr 11, 2002
Messages
797
Loc.
Brownsville
Other than having trouble getting it inspected I haven't had a problem yet. However, apparently in their zeal to raise money the DMV around here is paying closer attention to lifted rigs. At this point I probably won't do anything until I get stopped but it is just a matter of time.

Having seen the creative engineering that some people use to lift vehicles I am not surprised about this law. Way back in high school saw a rig with chunks of 2X4 painted black used for lift blocks. When they broke he crashed, luckily no one got hurt. If it wasn't for idiots like that we wouldn't have these laws!!

Looked around for a 1-1/2 inch lift but couldn't find anyone selling that size.

Oh yeah to answer the question about how they know, they don't but it becomes the vehicle owners job to prove them wrong. They win because who can afford that court battle.

Thanks for the replies, seems like the 2" BL, Warflare combo would work if it came to that.
 
OP
OP
XT700

XT700

Sr. Member
Joined
Apr 11, 2002
Messages
797
Loc.
Brownsville
Have 35" and only a 2" body lift with warflares. Waiting to put on the 3-1/2" monster suspension. It looks decent the way it sits and the rubbing is minimal. Its an option but will look better with the lift.

Got any pictures, checked your gallery but that must be a different rig.
 

Sweathog

Full Member
Joined
Jul 25, 2008
Messages
311
Loc.
Lansing
I'll try and send it to your email. Work computer so maybe there is a filter. Blue EB.
Paul
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
What a bunch of crap! I can't imagine living in a place where you cant mod your suspension. Is your Governor named Adolf by any chance?
 
Top