• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

modular engine into classic bronco.

khumphreys

Jr. Member
Joined
Jun 18, 2009
Messages
75
Loc.
Kinston
I've been seeing, in the chevy forums, where they are putting gen 3 modular engines out of 99-06 model trucks into the older 88-99 models. Has any body here attempted a triton 4.6 or 5.4 in an EB? If so could you elaborate on problems with availablity, fit, or just plain wont work. Thanks
 

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
been done many times. even supercharged!

[youtube]MdWPviIwdM8[/youtube]
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,708
Loc.
NH
One of our local guys put in a 32v Lincoln motor, Todd? care to chime in?
 

00gyrhed

Bronco Guru
Joined
Aug 3, 2006
Messages
2,428
you can do anything but why? They really fill the compartment up. :)

Everybody that I know that has that engine in an f150 hates it, for a multitude of reasons, but top of the list is the problems with the spark plugs.

351w makes a lot of torque and other than the oil pan will fall right in place. I spend my money and time on other stuff.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
man that new 5.0 Mod would be awsome in an EB!!!

Naw. Too high strung. Need more low end grunt. 6.2 maybe?
The ecoboost V6 looks very nice. Torque is flat (at something like 350 ft-lb) from 1500 to 5500 RPM.
GMs 4.5 duramax that has been on the shelf for several years looked pomising, if it ever comes out. Suppose to fit in the envelope of the LS engines so it should fit anyplace a small block would fit.
OK, you want Ford power, 4.4 V8 diesel is rumored to be coming. But I bet packaging will be a pain. The new truck engines always get packaged tall these days. At least an Ecoboost from an SHO (same as F150) fits under a low hoodline. So some creative parts collecting (SHO motor for short hoodline) and F150 for the 6 speed longitudanal mounted transmission with 4WD support. Hopefully there will be a stand alone harness and computer and now you have a killer new drivetrain.
 

cheapthrillb2

Jr. Member
Joined
Mar 26, 2008
Messages
137
Naw. Too high strung. Need more low end grunt. 6.2 maybe?
The ecoboost V6 looks very nice. Torque is flat (at something like 350 ft-lb) from 1500 to 5500 RPM.
GMs 4.5 duramax that has been on the shelf for several years looked pomising, if it ever comes out. Suppose to fit in the envelope of the LS engines so it should fit anyplace a small block would fit.
OK, you want Ford power, 4.4 V8 diesel is rumored to be coming. But I bet packaging will be a pain. The new truck engines always get packaged tall these days. At least an Ecoboost from an SHO (same as F150) fits under a low hoodline. So some creative parts collecting (SHO motor for short hoodline) and F150 for the 6 speed longitudanal mounted transmission with 4WD support. Hopefully there will be a stand alone harness and computer and now you have a killer new drivetrain.

Actually from what I have heard (from a ford engineer on that team) the eco-boost replaced the 4.4L for production into the f150.

Mileage under load isn't bad considering the displacement. This engine is impressive all around. This is the engine that killed the 4.4L diesel project. Made more hp, more torque with less fuel and less $$ than the diesel. I spent a lot of time on the 4.4L so I was pissed when the project was put on hold, but it only took me a few months to realize there was no place for the 4.4L diesel given the ecoboost family of engines coming out.
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
Yeah, I agree that ecoboost V6 would be the bomb for a Bronco. Might even be able to get upper teens out of one...if not better...which is saying alot in an EB.
 

HGM

Sr. Member
Joined
May 24, 2010
Messages
973
Loc.
Senoia, Ga.
Actually from what I have heard (from a ford engineer on that team) the eco-boost replaced the 4.4L for production into the f150.

Mileage under load isn't bad considering the displacement. This engine is impressive all around. This is the engine that killed the 4.4L diesel project. Made more hp, more torque with less fuel and less $$ than the diesel. I spent a lot of time on the 4.4L so I was pissed when the project was put on hold, but it only took me a few months to realize there was no place for the 4.4L diesel given the ecoboost family of engines coming out.

"Hold" is the key word here..... With NOx regulations and "new" emissions standards and components, the last thing a MFG would want to do is release two brand new unproven powertrains in their flagship line-up... Who knows what the future will bring.. The diesel market has taken a beating over the last few years because of the green police....

In this day and age, if I were to buy a new truck with the terrible fuel quality and regulations, there is no way I would buy a diesel unless I really needed it, then it would be a 6.7L... The Eco Boost tech is far more economical and impressive.... So, for interesting swap ideas, I'm a big fan of the Eco Boost, 5.0 and 6.2...

Anyone done a Gen 3 Lightning engine (big scoop of course) would be cool??
 

dnewman9

Bronco Guru
Joined
Aug 12, 2003
Messages
1,305
see my signature below for more info. I also posted a few tech threads on the research I have done.
Dennis
 
Top