• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

steerin box broke

gd71eb

Full Member
Joined
Apr 23, 2010
Messages
156
so i finally turned over the motor (suprisingly it worked!!!) and poured out of the PS box where the steering column bolts up. I was told i have a 4x4x2 box and by looking at othPS fluid er boxes it looks like it. this is one item thats not rebuilt or new on the truck so i figuered a rebuild couldnt hurt. got the box to the bench and removed the 4 bolts holding the end cap on and removed it. come to find out the cast piece is broke. question is what year rig would i look for to replace this?
IMG00036-20110425-1058.jpg

IMG00014-20100526-1725-1.jpg
 

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Ya def a 4x4x2, basically a late 70's f150/bronco box with the worm gear and input out of a 2wd box. I've built a couple and there great, got one on my truck now. Take a trip to a local u pull it yard and get a box from a 80's f150/bronco/E series van/bronco 2, basically anything that has the same top cover as yours. (2 bolts, oval cover) There all the same and will all work fine.
 

RustyShackelfor

Bronco Guru
Joined
Nov 30, 2009
Messages
1,593
Loc.
Centerville, TN
Wait, Im a little confused. Which way did you have the hoses on that? It looks like you have the return on the left and pressure to the right in the top pic.

This thread has it the other way around. Making sure it is plumbed right.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Wait, Im a little confused. Which way did you have the hoses on that? It looks like you have the return on the left and pressure to the right in the top pic.

This thread has it the other way around. Making sure it is plumbed right.

That is what it looks like. I see a barbed fitting on the high pressure port as well. Either it is plumbed backwards (and will get a nasty steering wheel shake when you try to turn the steering) or he is putting high pressure into a low pressure barbed fitting.
 

RustyShackelfor

Bronco Guru
Joined
Nov 30, 2009
Messages
1,593
Loc.
Centerville, TN
I just wanted to make sure. I saw this thread the other night before i posted in the other one and it got me all turned around. Dont want anyone else getting it backwards.
 
Top