• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

pick and pull

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Went to the pick and pull to find some parts for my 89. As luck would have it didnt find the main parts I was looking for. but ended up scoring 4 intermitant wiper setups, enough cherokee wiper arms for 2 broncos, and a set of gm front disc brackets and spindles. saw about 3-4 more disc setups but only grabbed this one because someone had already pulled the hubs and rotors. Might go back for another brake setup or two. but havent decided yet I'm collecting way to many parts. That dont help me get the 89 done.
 

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
That's the problem with pick and pull yards. You can't find what you went for but still come home with a truck load of parts. ;D
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
I love Pick and Pulls, but their prices here in Texas are getting about as high as new parts. I found enough Cherokee wipers for four sets and they wanted to charge me $80. I told them to keep them and walked away.
 
OP
OP
B

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Yeah its always luck of the draw when I go in. Sometimes it seems they have the same vehicles for months. Now I got to wait till they swap out vehicles again. luckily the prices are pretty decent here still. plus you can haggle with them a bit.
 

2b1ask1

Sr. Member
Joined
Sep 8, 2006
Messages
614
Loc.
oklahoma
Around here, you better take a buddy with ya, because someone will club you in the head and then steal your tools...
 

zombie66

Sr. Member
Joined
Aug 29, 2003
Messages
983
Loc.
Beaverton, oregon
Around here, you better take a buddy with ya, because someone will club you in the head and then steal your tools...

Your kidding right??? Nothing like finally getting that hydroboost set up pulled and someone smacks you in the head with a sack of doorknobs!:-X
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
Around here, you better take a buddy with ya, because someone will club you in the head and then steal your tools...

Here, I am usually the only person whose primary language is English. I was a little worried the first time, but honestly, these folks will drop anything to come help you pull a part. I'm sure there are bad folks in every crowd, regardless of where you're at, but I've had good experiences. I seem to see the same folks too and they always remember me. We loan each other tools and since they know what I'm usually looking for, they point out any new vehicles I might be interested in.
 

dalba4

Full Member
Joined
Mar 23, 2011
Messages
241
Loc.
Socal
Yeah I've been lucky over the past 10 years. No tools stolen.

I can't say the same about stealing from PAP.
 

dalba4

Full Member
Joined
Mar 23, 2011
Messages
241
Loc.
Socal
And before anyone gets all preachy on me - they are a steel scrapper, and metal recycler. The price they pay for cars is the salvage value of the steel.

So I've rationalized it quite well, no need to preach I'm too far gone.
 
OP
OP
B

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
If you can't find what you need for the '89, e-mail me - I might have it. ;D Junkyarding is my 3rd-favorite passtime. Wheeling is 2nd. ;)

I love junkyarding to. it used to be my sunday ritual to hit the pick and pull but now I'm 2 hours away so I dont go as often. I might hit you up though as the PO jacked up the steering column guess they had issues with the ignition switch must be common to those years because almost all the trucks in the junyard had theres gone already. I'll probably just fix whats left of the current exhuast system the PO left the O2 sensor off and tried to run straight pipes with no O2.(and they wondered why it didnt run worth a crap) also have do decide if i'm going to hook the egr system back up or not. about the only other item I have to fix on it is the fuel line they cut or broke the feed line and I need to fix the line. I just have it spliced with a rubber hose right now.
 

Slim

Jr. Member
Joined
Apr 12, 2010
Messages
119
Loc.
Costa Mesa
Around here, you better take a buddy with ya, because someone will club you in the head and then steal your tools...

Really? In the bixby area or are you venturing up in the N. Tulsa area? Whitey shouldn't be in N. Tulsa after dark. You should know that.;D
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
The biggest problem with the pre-'92 column is the actuators in the tilts, shown here:

.

They're only ~$25ea, but they're REALLY not fun to replace. If you can find a local steering column specialist (call the used car lots for his number) who'll do the work for $60-120, it's worth it. I'm hoping mine will last until I can find a good '92-96 body to move into, and then I'll have the better column.

Some of the early ig.sw.s were bad, but they're cheap & reliable once replaced.



The pre-'90 EFI fuel system sucks, but the lines are pretty easy to repair/replace. You can buy the fittings at NAPA (etc.), including a splice. Is yours broken on the hi-pressure section (frame pump to fuel rail) or on the low-pressure side?
 
Last edited:

Rox Crusher

Bronco Guru
Joined
Dec 13, 2008
Messages
2,830
Around here, you better take a buddy with ya, because someone will club you in the head and then steal your tools...

OUCH !

round these parts we routinely loan each other tools or help somebody while in the pull-n-pay.
 
OP
OP
B

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Yeah I had heard about the acutators being a issue thats probably what happened but they cut the lower rod. If I can find one of those then I'll just replace the upper acutator.
As for the fuel line its the HP side right near the fuel rail quick lock fitting. I'll have to see if a splice will work for me or not. If not I'm sure I can find another line that will fit off just about any other ford truck might even find a car setup thats long enough. Just my pick and pull didnt have the parts I need this go around.
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
If the original can't be repaired, you can only use a line from '84-89 with the hairpin fitting at the bottom to match your filter/hp-pump, UNLESS you want to convert the whole fuel line & pump system to '90-96 (much better, but some work). The other options are to build your own replacement from new fittings & line, or try to find a premade one (I doubt it) or replace that section with hi-pre$$ure rubber ho$e.
 
Top