• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

body moves when I turn steering wheel

tworedballs

Jr. Member
Joined
Dec 12, 2006
Messages
96
Loc.
Satellite Beach
So I have a 3.5" lift and PS. I noticed when driving the truck likes to wander. When it's running and the PS is active I just noticed that the truck shifts from side to side before it turns the wheels. I can see the drag link and stabilizer working, but the wheels aren't turning until the body has shifted from one side to the other. What could be causing this?
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
Lay underneath while someone else turns the steering wheel (while the truck is stopped!) and see what's moving first.

I got that sensation when I ripped the frame where the track bar mounted.
 
OP
OP
tworedballs

tworedballs

Jr. Member
Joined
Dec 12, 2006
Messages
96
Loc.
Satellite Beach
so should I try replacing ALL the bushings in the steering system? The truck is a little tired and I'm sure all could use it. Also, if I do this what else should I consider replacing (bushings, body mounts, etc.) while I have it off?
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Lay underneath while someone else turns the steering wheel (while the truck is stopped!) and see what's moving first.

I got that sensation when I ripped the frame where the track bar mounted.

X2! I didn't rip the frame but tore the trac bar drop bracket loose (it was hanging on by a thread) and same exact sensation.
 
OP
OP
tworedballs

tworedballs

Jr. Member
Joined
Dec 12, 2006
Messages
96
Loc.
Satellite Beach
No rips on the frame or anything like that. It all "looks" solid from underneath, but the frame moves before the tires do. All linkage moves freely as it should, but the body shifts before the tires actually move. I am ordering a C-Bushing kit from JBG and will replace those pieces and see if that clears up the slop and helps the tracking.
 

lilthom

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,714
I have to go with Fungus. When mine did that it was because the steering box and drop bracket were loose. It was weird to sit and watch from the inside of the cab. Look again before you spend alot of time and money on bushings.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
No rips on the frame or anything like that. It all "looks" solid from underneath, but the frame moves before the tires do.
Did you do this while laying underneath and having someone turn the steering wheel? You won't see the issues unless you do that.
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
No rips on the frame or anything like that. It all "looks" solid from underneath, but the frame moves before the tires do. All linkage moves freely as it should, but the body shifts before the tires actually move. I am ordering a C-Bushing kit from JBG and will replace those pieces and see if that clears up the slop and helps the tracking.

Sumpin' ain't right with either your steering box OR trackbar mount where they attach to the frame! F the C bushings. Have someone turn it side to side and STARE at both those locations while laying underneath it. You've got some bolts that came loose or welds that broke. Trust me, hard to actually notice the problem until you see it in MOTION. When I tore my trackbar mount the frame and body would move before the tires would turn. I got out and "looked" at it static several times before I noticed what the problem was. Trackbar was hanging on by the upper bolt (lower had been broken and lost) and the bracket was just swinging (bending) back and forth as steering pressure was applied. If the wheels had been centered when I looked I would've never noticed. Glaringly obvious though the someone was turning the wheels and I was eyes on.
 
Last edited:

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
I have to go with Fungus. When mine did that it was because the steering box and drop bracket were loose. It was weird to sit and watch from the inside of the cab. Look again before you spend alot of time and money on bushings.

had the exact thing happen to me
 

rustbucket

Bronco Guru
Joined
Mar 22, 2004
Messages
1,579
Lay underneath while someone else turns the steering wheel (while the truck is stopped!) and see what's moving first.

I got that sensation when I ripped the frame where the track bar mounted.

That's what happened to mine.
 
OP
OP
tworedballs

tworedballs

Jr. Member
Joined
Dec 12, 2006
Messages
96
Loc.
Satellite Beach
Thanks, guys. I'll get a helper and check out the underside while turning the wheel. I still think the C-bushing kit would be good as it'll replace all the stock rubber under the front end including the trac bar bushings. Also probably gonna do the radius arm bushings while I'm there, too. Hell, while I'm at it I might as well run those new brake lines I've been needing! And my shocks are about dead, so i might as well get some new cushioning under there. Maybe get some softer springs...and on and on and on.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
Also probably gonna do the radius arm bushings while I'm there, too. Hell, while I'm at it I might as well run those new brake lines I've been needing! And my shocks are about dead, so i might as well get some new cushioning under there. Maybe get some softer springs...and on and on and on.
Yup! That's how it starts!!!;D
 

sriha

Sr. Member
Joined
Jul 28, 2010
Messages
683
Sumpin' ain't right with either your steering box OR trackbar mount where they attach to the frame! F the C bushings. Have someone turn it side to side and STARE at both those locations while laying underneath it. You've got some bolts that came loose or welds that broke. Trust me, hard to actually notice the problem until you see it in MOTION. When I tore my trackbar mount the frame and body would move before the tires would turn. I got out and "looked" at it static several times before I noticed what the problem was. Trackbar was hanging on by the upper bolt (lower had been broken and lost) and the bracket was just swinging (bending) back and forth as steering pressure was applied. If the wheels had been centered when I looked I would've never noticed. Glaringly obvious though the someone was turning the wheels and I was eyes on.

Mine was the same way but I think the PO just didn't put the second bolt in because there was no other bolt hole. It wasn't until I put bigger tires on that it got fixed. I just assumed that the Bronco was always squirrely.:eek:
 
Top