• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

O2 Sensor question

PatrickDoyle

New Member
Joined
Jan 13, 2011
Messages
23
Loc.
Dinuba
I bought my bronco with a 1990 mustang 5.0 engine in it and it has 2 catalytic converters on it and is really quite i am just wondering if i cut the exhaust pipe off before the catalytic converter if it will make my engine run poorly because the 02 sensors wont be reading anything??? thanks
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
O2 sensors should be closer to the engine. Are you saying the O2 sensors are behind the converters?

Yes, you need the sensors to allow the EFI to go into closed loop mode.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
O2 sensors should be closer to the engine. Are you saying the O2 sensors are behind the converters?

Yes, you need the sensors to allow the EFI to go into closed loop mode.
Not only do you need the O2 sensors to be able to go into closed loop, they need to be before the converters (between the engine and converter) to be able to sense the proper O2 level.

Don't know what's worse. No reading or a bad reading...
 

Punisher

Sr. Member
Joined
Nov 25, 2004
Messages
505
Are there any sensors after the cat or are they before the cat? If they are before you should be fine but if there are any after you might have a problem.
Plus if you cut them off get ready for the smell of exhaust. In my f150 I wasn't happy with the exhaust sound so I did a straight pipe no muffler after the cats and I was happy with the tone. Not to loud but it had a low rumble to it.
 

OX1

Bronco Guru
Joined
Aug 26, 2003
Messages
3,472
Are there any sensors after the cat or are they before the cat? If they are before you should be fine but if there are any after you might have a problem.
Plus if you cut them off get ready for the smell of exhaust. In my f150 I wasn't happy with the exhaust sound so I did a straight pipe no muffler after the cats and I was happy with the tone. Not to loud but it had a low rumble to it.

If they are after, he probably already has a problem.
 

Punisher

Sr. Member
Joined
Nov 25, 2004
Messages
505
If they are after, he probably already has a problem.

Yeah on a 90 that would be true. But on newer motors they put sensors after the cats as well. Not sure what year and not exactly sure what type of sensor they are. I just always assumed they were another o2 sensor.
 

ilovemaui

Bronco Guru
Joined
Jul 10, 2010
Messages
1,651
Loc.
Pacific Moist West
Typically the O2 sensors at the back are wideband sensors. You don't need wideband unless you're intending to use a tuner. I have a third O2 sensor (wideband) on mine just because I like to monitor the fuel/air ratio.
 
Last edited:
OP
OP
P

PatrickDoyle

New Member
Joined
Jan 13, 2011
Messages
23
Loc.
Dinuba
The sensors are before the catalytic converter, so as long as i dont cut off the sensors i can cut everything els off?
 
Top