• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dustless sandblasting

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
http://www.youtube.com/watch?v=7Q5UpMkUwDo

http://www.youtube.com/watch?v=nucYBS4B0bc

Anyone have experience with this process. I am thinking of buying a unit and getting a side buisness going. Will not warp panels and does a car in 1 hour. I was thinking of getting buisness from local restoration shops and just stripping it in their parking lots on a tarp, roll up the mess and leave, or doing it at my house and offer an epoxy prime.
 

HoosierDaddy

Contributor
Bronco Guru
Joined
May 29, 2006
Messages
2,776
This dustless system looks pretty cool.

I've not seen the dry ice on an automotive application , but I was less than impressed with it when used on some copper electrical buss I was working with.
It may have been the operator also ... I dunno.

Of course this dustless system would have been worth less in that application. We were already repairing flood damage to electrical equipment , no need to add more water to the issue.
 

jspurl3

Sr. Member
Joined
Dec 30, 2008
Messages
818
Loc.
Baton Rouge, LA
Get it so I can drive up and test it out with you! Im looking to see what my blasting options are around here as we speak
 

Crude dude

Jr. Member
Joined
Feb 4, 2012
Messages
136
Im actually (hopefully) a couple weeks away from having my Bronco tub stripped down and was going to have it soda blasted. Is this now a bad idea? Im taking it to a guy to have it painted and he did not mention that a soda blasted vehicle would be an issue.
 

jspurl3

Sr. Member
Joined
Dec 30, 2008
Messages
818
Loc.
Baton Rouge, LA
Im actually (hopefully) a couple weeks away from having my Bronco tub stripped down and was going to have it soda blasted. Is this now a bad idea? Im taking it to a guy to have it painted and he did not mention that a soda blasted vehicle would be an issue.

Should work fine; however, it doesnt work on rust just the paint, bondo, and grime...
 

Crude dude

Jr. Member
Joined
Feb 4, 2012
Messages
136
Just had the only rust on it replaced, floor boards and cowl under the windshield (under the hood). I will make sure I tell the painter what it has been through.
 

BoureeOne

Bronco Guru
Joined
Mar 28, 2011
Messages
3,068
Loc.
Madisonville, La
Should work fine; however, it doesnt work on rust just the paint, bondo, and grime...

John, there is a guy over near Prairieville that does soda blasting in his back yard. I had an old coke machine done by him. He also restores cars. I will have to look around again to get his name and number if you are interested.

Scott
 

strokedaddy347

New Member
Joined
Feb 18, 2010
Messages
14
What did it do to the chrome trim? They didn't show a close-up of the door handles or some of the trim around the windsheild. That crushed glass & water may be ecthing those pieces if left unprotected during blasting. Just my thoughts.
 

bk005

Sr. Member
Joined
Nov 20, 2011
Messages
366
Loc.
San Antonio
I was looking for media blasting services in San Antonio, and found a guy in Seguin that has the dustless system. I was thinking of calling and getting a estimate.
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
wondering if you can have a bronco done underneath aswell? Trying to see what it would hurt. assuming no wireing or gas lines on it as i could see that being a problem. Wondering if it would get into t case, trans, axels ect.
 

71massbronco

Bronco Guru
Joined
Mar 13, 2011
Messages
1,321
What did it do to the chrome trim? They didn't show a close-up of the door handles or some of the trim around the windsheild. That crushed glass & water may be ecthing those pieces if left unprotected during blasting. Just my thoughts.

In a different video they show taping off the chrome.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
I can't believe how fast it works. My media blaster said my Bronco body without fenders or hood would take 8-10 hours for underside, inside, engine compartment, and top.
 

jspurl3

Sr. Member
Joined
Dec 30, 2008
Messages
818
Loc.
Baton Rouge, LA
John, there is a guy over near Prairieville that does soda blasting in his back yard. I had an old coke machine done by him. He also restores cars. I will have to look around again to get his name and number if you are interested.

Scott

Awesome thanks Scott. Send it to me when you find it. I think I will be fine with soda on the 66. The only rust i have found I'm going to cut out anyway.
 

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Is it just me or does that old Caddy look like it just came back from Maaco with a fresh budget paint job for them to remove? Factory paint does not come off that easy. Single layer fresh, cheap paint will.
I've bought Broncos with similar thin paint that I was able to remove mose of it with a 3500 psi pressure washer.
 

71massbronco

Bronco Guru
Joined
Mar 13, 2011
Messages
1,321
Is it just me or does that old Caddy look like it just came back from Maaco with a fresh budget paint job for them to remove? Factory paint does not come off that easy. Single layer fresh, cheap paint will.
I've bought Broncos with similar thin paint that I was able to remove mose of it with a 3500 psi pressure washer.

Yeah, highly suspect. From a guy who does video production for a living, they have staged all of their videos for demonstrative purposes.

On their other video there was graffiti that needed to be removed from a building. It was the same building in a different video that they blasted a car next to.

But it looks like a pretty cool system. Wish I had one!
 
Top