• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What is a good car lift source

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
Who has bought a car lift recently and from where? I am wondering about how much shippng ran also? I looked at a few on summitracing for 2500.
 

rmiller747

Bronco Guru
Joined
May 11, 2009
Messages
1,102
Loc.
Highland, Mi

Attachments

  • image.jpg
    image.jpg
    112.7 KB · Views: 181

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Have been thinking about getting a lift as well.

Miller747 - How tall is your garage? 11 feet?
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
Little can of worm in a standard garage. Different opener and track for door. In case you haven't thought trough it.


Blue

Sent from my iPhone using Tapatalk 2
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
Little can of worm in a standard garage. Different opener and track for door. In case you haven't thought trough it. That's what's stoping me as I have a chance at a used one. I have 12 ceilings in my garage aswell.


Blue

Sent from my iPhone using Tapatalk 2




Blue

Sent from my iPhone using Tapatalk 2
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Greg Smith Equipment. They have a 9000 lb capacity 2-post lift for about $1800 I have not bought it yet, but used their specs for pouring my garage floor. It has symmetrical posts with asymmetric arms - they call it super symmetric arms. Needs 11'6" min ceiling.

Atlas 90HSC
 
OP
OP
rjrobin2002

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
Greg Smith Equipment. They have a 9000 lb capacity 2-post lift for about $1800 I have not bought it yet, but used their specs for pouring my garage floor. It has symmetrical posts with asymmetric arms - they call it super symmetric arms. Needs 11'6" min ceiling.

Atlas 90HSC

I just checked them out, i am going to check on shipping. I wish i lived in Austin like you where they have a warehouse.
 

bad 68

Sr. Member
Joined
Jul 1, 2010
Messages
930
Loc.
Northest Washington
Both BendPak and Dannmar ship for free from the factory. I plan to buy a 10,000 pound BendPak symmetric lift this fall. I have a 16 foot ceiling so I don't have that obstruction to deal with.
 

12gabronc

Jr. Member
Joined
Oct 28, 2012
Messages
52
Loc.
Canada,B.C.
we have had our Atlas lift for 2yrs with no isues! Same lift as rmiller747 and we lift our desiel F350's all the time! It's a great lift for the price.I bought it at Napa Auto here in Canada not as cheap as you guys can get them in the US but it was still very reasonable.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Try http://www.naautoequipment.com/. While I haven't purchased it yet, I did my research and this was my top pick. Their 2 post lifts are made in the US and are designed better than the Chinese ones. Their 4 post lifts have some nice safety features. There was also some reason I liked them because of their ramp, but I can't recall at the moment what it was. They were shorter or something. They also have them in stock in a number of states so you can just go pick it up and save the shipping charge.

Blue is right, you'll have to change the tracks on your Garage door and move the opener right up against the ceiling unless you get a side mounted (wall) opener.
 

rmiller747

Bronco Guru
Joined
May 11, 2009
Messages
1,102
Loc.
Highland, Mi
Try http://www.naautoequipment.com/. While I haven't purchased it yet, I did my research and this was my top pick. Their 2 post lifts are made in the US and are designed better than the Chinese ones. Their 4 post lifts have some nice safety features. There was also some reason I liked them because of their ramp, but I can't recall at the moment what it was. They were shorter or something. They also have them in stock in a number of states so you can just go pick it up and save the shipping charge.

Blue is right, you'll have to change the tracks on your Garage door and move the opener right up against the ceiling unless you get a side mounted (wall) opener.


That 4 post lift sure looks like the one I ordered from Greg's. exact same safety features. Only difference I see at all is the hydraulic storage tank. Mine is metal and that appears to be plastic.

I raised my tracks and installed the side mount worm gear opener.
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
With the car dealers going out of business they were pretty common used. I picked up an older 6k lb Benpak unit for $400. Check craigslist and auction website auctionzip.com
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
I'm almost positive that all the US made lifts are all divisions of the Dover Corporation. Different paint, names and options but it's all Dover. They bought everyone out.

I guess my point is, save on shipping by finding a distributer near you cause there all the same so to speak. I was planning on getting a 4 post from Derek Weaver. Drive to Dallas, pick it up and save the freight.

http://www.derekweaver.com/4-post-lifts/?sort=priceasc

Tim
 

gnpenning

Contributor
Bronco Slave
Joined
Dec 26, 2011
Messages
2,601
Loc.
I have more questions than answers.
Garage door will need a high lift track or a follow the roofline depending on your garage. Chamberlain liftmaster 3800 series opener. It is a residential jack shaft opener they are quite and work great. They mount to the spring shaft, with a remote light. I like them much better than an "brand X" jackshaft opener.
 

rmiller747

Bronco Guru
Joined
May 11, 2009
Messages
1,102
Loc.
Highland, Mi
Garage door will need a high lift track or a follow the roofline depending on your garage. Chamberlain liftmaster 3800 series opener. It is a residential jack shaft opener they are quite and work great. They mount to the spring shaft, with a remote light. I like them much better than an "brand X" jackshaft opener.



What he said...

For anyone that wants a pic
 

Attachments

  • image.jpg
    image.jpg
    80.4 KB · Views: 108
Top