• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Mercon + injectors = bad?

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
So for todays brainfart...... I spent the morning cleaning and rebuilding my fuel injectors. I put a little oil in an oil bottle cap to throw the o-rings into so they would slide into the manifold and fuel rail nice. Get done, button everything back down, and start to clean up. As I am putting the oil bottle away I realize it was actually a bottle of Valvoleen Dex/Merc! :mad::cry: Did I screw up my o-rings and need to replace them, or will it be fine?
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
As long as they don't swell up they'll be fine. I use vasoline to lube the o-rings.
 
OP
OP
67 Halfcab

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
Maybe I'll throw one of the spare viton o-rings and pintle cap into some mercon and see what happens. I'll pretend it is a little science experiment! :p
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
the o rings on the injectors will be fine with mercon, usually use vasoline on injector rings.
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
I used dow coring 111 on my orings havent had a issue. it is a oring lubricant.

Not to thread jack....But years back I had a brake squeal that I tried everything to fix. My muffler/brake guy told me to coat the back of the pad with 111 and it will never squeal again. I've been using it for years now...Jack over!!
 
Top