Here is the contact info on that one
I am selling my 1972 Ford Bronco project. this is an extremely good start to one of the coolest roadsters on the planet. I have been working on this project for the last 7 years. the following is what is curently completed on the project.
The frame was set on a frame bench and custom built for this project. it has Fat man fabrications mustang two front suspension with solid stainless control arms and air ride tech. billet air suspension with large two piston Wilwood disc brakes. the rear suspension is Fat man four link with narrowed 9 inch. center section included but no brakes yet.
The drive trane is 2004 Mustang GT out of a doner car with 53k miles (installed only not running yet)
The body has been completly rebuilt, quaters are uncut from Arizona, doors are solid and front fenders are aftermarket. windshield post has been cut 3 inches. Sheet metal work is 90% complete , just going to need some inner fenders once steering and master cylinder have been installed. the floors and fire wall are all custom built to fit , the tail gate is welded solid . wheels are new as well as the Nitto Tires (2k alone).
I will only consider serious buyers, I am not looking to trade anything, and am not negotionable. I have over 20 k in this right now. finished right it should bring close to 80k.
Do not ask how much it would take to make it a 4x4 again or how hard it would be to put a top back on it.I will assume you do not have the same vision for it that I have and that you are not a serious buyer.
I do have a clean title for this truck.
Call Doug
704-677-0980