• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

anyone made rear side panels w/ storage?

rockerZ71

Sr. Member
Joined
Apr 25, 2013
Messages
407
Loc.
Lawrenceville GA
Did a search and didn't come up with anything - just about done with my front door panels and got to thinking about the rear interior panels. Not much room for keeping stuff in the bronco and it seems like that space around the wheel wells is just wasted, besides a lot of people putting speakers back there (which I will probably do as well. I was thinking maybe sectional panels where pieces could be easily removed, or maybe with a couple hinged doors allowing stuff to be put back there. If something similar has been done, I'd love to see some pics

Thanks
 

BRONCROB

Bronco Guru
Joined
Nov 24, 2010
Messages
1,613
Loc.
WISNER LA.
Bailey built makes some side trays that look pretty handy.I have seen pictures of some that go from the top of bed rails to to inside of the fenders down to the floor.I just keep a couple ammo cans in mine for tools and such.My cooler holds the important stuff;D
 
OP
OP
rockerZ71

rockerZ71

Sr. Member
Joined
Apr 25, 2013
Messages
407
Loc.
Lawrenceville GA

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
I know this isn't what ur talking about but interesting anyway.
esegu2es.jpg
 

blakerj10

Full Member
Joined
Dec 8, 2004
Messages
225
Loc.
Gillette
I thought about using some stock style side panels and modifying them to use a stock glove box door and one of the replacement poly liners.
 
OP
OP
rockerZ71

rockerZ71

Sr. Member
Joined
Apr 25, 2013
Messages
407
Loc.
Lawrenceville GA
I thought about using some stock style side panels and modifying them to use a stock glove box door and one of the replacement poly liners.


That sounds similar to what I'm going for. I hadn't thought about the tuffy boxes mentioned above, but really dont want to take up any more space than normal panels. Just would be nice to have storage for some of the small crap that I have stuffed under my front seats or just laying on the floor etc. Stuff like a rain jacket i like to keep in the truck, gloves, and tools. Would be nice to be able to lock up a rifle in one of the sides too.

Kind of a side question, is it possible to get locks like the one that came w/ my tuffy console and have them made to all use the same key? I'm going to build these panels I'm talking about at some point, and probably also either build or buy under-seat boxes and would like to have just one key for all of it
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
Hinge or peg the rear section of the bed panel to the section above the wheelwell, and use a simple common lock cylinder with a flat paddle to lock the rear panel section to the rear steel lip of the body. It will be so big it won't look like a door, other than the keyhole. Use the key as the handle to pull that section open, and use wire or net inside to hold junk in-place while reinstalling the door.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I have Bailie's trays and absolutely love them, couldn't see not putting them in. and if you wanted to hide them a hinged panel would be easy enough to make, and with some apholstery tricks be completely out of sight.
 
OP
OP
rockerZ71

rockerZ71

Sr. Member
Joined
Apr 25, 2013
Messages
407
Loc.
Lawrenceville GA
Hinge or peg the rear section of the bed panel to the section above the wheelwell, and use a simple common lock cylinder with a flat paddle to lock the rear panel section to the rear steel lip of the body. It will be so big it won't look like a door, other than the keyhole. Use the key as the handle to pull that section open, and use wire or net inside to hold junk in-place while reinstalling the door.

I like it. I'd have to do it in sections because otherwise the roll bar would stop it from opening. Alternatively, it could kinda lock in place with tabs at the bottom instead of hinges and then just lift out when unlocked. If I didn't need it to lock, magnets seem like a convenient way of attaching it
 
OP
OP
rockerZ71

rockerZ71

Sr. Member
Joined
Apr 25, 2013
Messages
407
Loc.
Lawrenceville GA
I have Bailie's trays and absolutely love them, couldn't see not putting them in. and if you wanted to hide them a hinged panel would be easy enough to make, and with some apholstery tricks be completely out of sight.

Yeah I'm pretty sure those trays are going to be part of it. I hadn't put a whole lot of thought into this obviously, but had envisioned multiple lockable compartments/doors and then I'd have to build shelves or whatever inside. Or I could just buy these things and make single piece panels (maybe). And the fewer pieces, the less stuff to potentially rattle around and the easier to build
 
OP
OP
rockerZ71

rockerZ71

Sr. Member
Joined
Apr 25, 2013
Messages
407
Loc.
Lawrenceville GA
the wheel well boxes are a great idea make jump seats with storage

seems like the height would be a problem from the pic above - I know my factory rear seat sits very low to the floor and doesn't offer much head room either for adult passengers. Might work for kids though
 

Arikilen

Full Member
Joined
May 4, 2005
Messages
210
Loc.
Clovis, CA
no hinges at all and make slide out like a closet door. Look like one big a$$ panel. Would require the liftgate be unlocked and tailgate down to get it out. Especially with a roll cage. No additional lock required.
 
OP
OP
rockerZ71

rockerZ71

Sr. Member
Joined
Apr 25, 2013
Messages
407
Loc.
Lawrenceville GA
That may work better. I was remembering the wrong geometry before. But it would still have to split over the wheelwell, or rear of it.

.

very nice work on those panels, front and rear.

heres the front one I made, probably going to change it up eventually but it looks a lot better than the beat and bent up old ones I had. And not sure what I want to do with the door cups so I just spray painted the green original one I had for now.

2014-01-12%2016.51.48.jpg


2014-01-12%2016.01.29.jpg
 
Top