Not really any different than you beating your drum about the Bronco Design tub with whom you obviously have a personal relationship with, and you don't even own one? Pretty obvious VT_Don wanted to keep the issue in the Private Message realm. Did you take the time to contact him, as requested?
Fiberglass is a finicky material to deal with. Molds are a bitch to work with. I imagine a bad tub or two, by the time the gel coat has cured, and the tub has travelled many miles to the end consumer, might have some issues. If a guy has some issues, let him vent, even if its by PM.
And what exactly did you bring to this conversation as far as personal insight, experiance or techincal knowledge pertiant to the topic at hand? %) It seems to be that you just brought a stick to stir things up, and that is OK, since I have no problem backing up each and every thing I have stated.
I am not beating "my drum". I have nothing to gain if someone buys a BD body or anyone elses.
Long story short (relatively, considering 14+ year history):
Yes, I know the original owner from many years ago when he started on the long path to make all the molds for what is now being offered. I even kicked around some ideas with him and we picked apart the other tubs being offered and spoke with owners of them to see where to improve. I also spent over a month living with a college buddy who lived near Mike so I could work with Mike every day on the plug for the main tub. Soon after I was selling his truly innovative one piece door inserts under my name before he created and struck out as BroncoDesign 10+ years later.
Mike and I had a falling out when I had stacks of orders and payments and he could not keep up. After a couple times of refunding peoples money, I got the shits of it and quit selling them. Mike returned to a regular full time job, the tub go put on the slow track, I later had a set of my own insert molds made since everyone knew them under my name and I continued to get calls on them and he had quit producing parts. Mike was likely not happy, but since he quit producing and I was getting calls for them, some friends convienced me to spend a few grand and have my own molds made. That ended up being a nightmare. I did not want to lay up glass at my shop, so I looked to outsource them and just resale them like I was doing with Mike. I went through more than half a dozen glass shops and none could produce the quality people demanded at a price that made them affordable and still worth doing on my end. I sold this direct and through BC Broncos for a while. I eventually sold the molds to Wild Horses and they later got stolen and sent to Mexico by a shop that was doing them for WH.
Years later, Mike comes back on the scene and shows up at the East Coast Bronco Roundup with the finished tub looking great, with all the features we'd discussed 10+ years earlier and more. We both put any past hard feelings we had aside, and moved on since holding any grude was pointless and not beneficial to either of us or the community we are both active in. Bottom line is that he made the best, most innovative Bronco glass out there hands down, and I have always said that, even when we had our business differences. I will not deny someones talent or dedication to their craft for any personal reasons.
Since then, my dad and I have bought a full set of molds to make Bronco golf cart bodies. We did this only after some long discussions with Mike and sending him many photos of the molds. We value his expertise and wanted him to make them for us since we knew he could produce a high quality part at a price that we could retail them at and eventually see a return on the thousands of dollars we had in the molds. Plus we knew Mike was fanatical about mold maintenance and taking care of them unlike many shops are, especially with customer owned molds.
Well, Mike made some golf cart parts for us, but then ended up selling BroncoDesign to the new owners in TN, so we are again looking for a local source since it is a 24 hour drive down to Nashville and back which is more than I want to do to get parts. However, I have not written that idea off 100%, because I have also seen their work up close and in person and am impressed.
Contrary to what you implied, I do not have to personally own a BD tub to know quite a bit about them and the people behind them considering the various levels or involvement with them over the last 14+ years. I do have a customers Kentrol project sitting out in my shop right now, and I can tell you I am not a fan of that.
- Have you ever seen the molds that make these up close and in person, or even a finshed BD tub for that matter?
- Have you ever spent hours doing side by side comparrisons of a Kentrol and Terra Comp (old Mallotte at the time)?
- Have you ever done any hands on fiberglass mold design or part layup?
- Have you ever owned molds or sold parts and had to battle to get high quality at an affordable price?
Please, tell me more on how finicky of a material fiberglass is, I'd love some more detailed insight that I missed along the way. I am no expert, I leave that to Mike and the new owners and others who do this day in and day out, but I have invested enough shop time and $ over the years in it to know more than the average person sitting behind a keyboard on the interweb.
For all intents and purposes, the gel coat and glass is cured before it comes out of the mold. Travel on a trailer will do nothing to the part unless it is physically damaged in shipment from dropping it or?
No, I did not take the time to start an offline discussion. I am not the one to make him happy, Mike or the new owners are. Like I said, if someone is experiancing an issue or who has uncovered some mysterious
"serious pitfalls", there is a way to say it without bashing. Just be factual. I.e, "I have tub #XX and I have found that my (insert item here) does not line up with (XXXX) like I expected and there is a Y" gap, has anyone else had this with theirs? Or, "I have one, but I was dissapointed in the (insert item here). I called BD and they told me....... (or I am in the works of trying to resolve this with them now).
But, to just throw a turd in the punch bowl with not a shred to support it is BS IMO whether it is towards BroncoDesign, a vendor I have never delt with, or even one I may not like myself. Venting to me is useless, it needs to be directed and resloved with BD or vented in a professional and factual manner here.