• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Kentrol internet rumors?

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
Rather than making a mysterious negative reference publicly that can not be addressed, share it here if you have personal insight on these.

I've seen these up close many times and have know several who have installed and finished them with no notable issues or problems.

If they are producing half the quality Mike was it's still the best thing on the market. I have one of the old Kentrol tubs and while it's a great tub for my use, if your a stickler for details, it falls short. I don't know about the new owners but I know Mike was a pretty passionate guy, so I can't imagine he just dumped it off on anybody. Maybe there where some hand-off issues or something, but the new owners seemed to jump right on the board and get involved. I would also like to know what issue could cause someone to have a negative opinion because I have always seen BD as one of the exemplary Bronco companies.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
Mike has been VERY hands on during the transition. He came up to PA from his new job in NC to work at the show with them, just like he has at the Super Celebration and All-Ford.

Mike and his wife have both told me that they think the new owners are turning out an even better product.

There are ways to point out issues, short comings or missed expectations without bashing or being nasty or negative, but to just throw out a vague comment that implies there are serious issues with no specifics is not cool.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
I now have a BD tub at the house. The other companies may as well quit making them because this tub is great quality. Just as long as BD stays in business we are in good shape.
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
I now have a BD tub at the house. The other companies may as well quit making them because this tub is great quality. Just as long as BD stays in business we are in good shape.

Good I can take a look at it, when I bring you your transfer case back.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
You would have spent over a $1000 just trying to get the tub to fit, unlike the Terra Comp and Bronco Design. Kentol quality is no where near what the others (2) fiberglass companies tubs are.

Lies!!!!!!! I got a new kentrol tub 3 years ago and love it! It didn't cost anything to get it to fit...actually the glass pieces went together almost effortlessly compared to new steel parts I have gotten. As far as quality...my Kentrol tub gets a A++ from me!
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
I have the Bronco Design front fenders and door inserts. I just back-halfed my Bronco to stretch the wheel base and tube out the rear. Going to hang BD rear quarter skins. So my Bronco body will be all BD fiberglass except for the WH Highlander f/g hood and the steel grille. Next best thing to a full BD tub! ;D
 

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
Drew, before cheerleading too hard for the BD product, may wish to reserve coment for folks with recent, first hand experience. There are some serious pitfalls. As time allows, I'd be pleased to share information by PM.

I would very much appreciate your thoughts on what is wrong with Broncodesigns.
 

NGABronco

Contributor
Always Learning
Joined
Feb 4, 2007
Messages
7,574
Loc.
N. GA now South Carolina
I have the Bronco Design front fenders and door inserts. I just back-halfed my Bronco to stretch the wheel base and tube out the rear. Going to hang BD rear quarter skins. So my Bronco body will be all BD fiberglass except for the WH Highlander f/g hood and the steel grille. Next best thing to a full BD tub! ;D


Yeah, but that's easy for you to say....cause you're a rich ole retired guy... with a damn nice shop!!!!;D;D;D

Pics or it ain't so!!!!;D;D;D
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Yep. It holds up great. Its cushy, you can get designs cut in it." BRONCO" Plus lots of colors. Insulation and sound deadener in one. On a fiberglass tub this will be great
 

Nellybell

Jr. Member
Joined
Sep 22, 2012
Messages
107
AND it comes with big fish and bikini models. I am sold! They are included aren't they?
 

mp

Bronco Guru
Joined
Dec 22, 2001
Messages
2,921
Loc.
Austin, TX
Mike has been VERY hands on during the transition. He came up to PA from his new job in NC to work at the show with them, just like he has at the Super Celebration and All-Ford.

Mike and his wife have both told me that they think the new owners are turning out an even better product.

There are ways to point out issues, short comings or missed expectations without bashing or being nasty or negative, but to just throw out a vague comment that implies there are serious issues with no specifics is not cool.

Not really any different than you beating your drum about the Bronco Design tub with whom you obviously have a personal relationship with, and you don't even own one? Pretty obvious VT_Don wanted to keep the issue in the Private Message realm. Did you take the time to contact him, as requested?

Fiberglass is a finicky material to deal with. Molds are a bitch to work with. I imagine a bad tub or two, by the time the gel coat has cured, and the tub has travelled many miles to the end consumer, might have some issues. If a guy has some issues, let him vent, even if its by PM.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Hoping to douse with water here, not stir the fire . . .

Personal relationship here comes from the former owners of BD being Bronco folks and actually attending Bronco events (a tradition the new owners appear to be continuing). Just like a lot of us have "personal relationships" with the Duff's, Jim Creel, Gordon Bailie, Tom Wimmer, etc. I don't know of any Bronco events attended by TerraComp or Kentrol.

Plus BD has been very responsive to Bronco owners' needs and suggestions. Examples are the stretched tub, the trail rig tub with molded in door inserts, availability of rear skins, additional metal reinforcement and probably more. They only build Bronco bodies, no jeep, scout or 'yota stuff. So even if quality was merely equal, I'd be inclined to give BD my business.
 

72pabronco

Full Member
Joined
Oct 18, 2009
Messages
172
As a BD tub owner I'll throw in my 2 cents. It is glass after all. You need to expect some problems with it. I have tub #4 and its been on the road 3 years and has been at many events. I have had no fitment issues and am please with the product. Have a 2nd BD tub that will be starting to work on this winter. I'm sure that Corey will respond to any questions that you have. They(BD) are at many of the Bronco events , stop in and see his product.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
Not really any different than you beating your drum about the Bronco Design tub with whom you obviously have a personal relationship with, and you don't even own one? Pretty obvious VT_Don wanted to keep the issue in the Private Message realm. Did you take the time to contact him, as requested?

Fiberglass is a finicky material to deal with. Molds are a bitch to work with. I imagine a bad tub or two, by the time the gel coat has cured, and the tub has travelled many miles to the end consumer, might have some issues. If a guy has some issues, let him vent, even if its by PM.


And what exactly did you bring to this conversation as far as personal insight, experiance or techincal knowledge pertiant to the topic at hand? %) It seems to be that you just brought a stick to stir things up, and that is OK, since I have no problem backing up each and every thing I have stated.



I am not beating "my drum". I have nothing to gain if someone buys a BD body or anyone elses.

Long story short (relatively, considering 14+ year history):

Yes, I know the original owner from many years ago when he started on the long path to make all the molds for what is now being offered. I even kicked around some ideas with him and we picked apart the other tubs being offered and spoke with owners of them to see where to improve. I also spent over a month living with a college buddy who lived near Mike so I could work with Mike every day on the plug for the main tub. Soon after I was selling his truly innovative one piece door inserts under my name before he created and struck out as BroncoDesign 10+ years later.

Mike and I had a falling out when I had stacks of orders and payments and he could not keep up. After a couple times of refunding peoples money, I got the shits of it and quit selling them. Mike returned to a regular full time job, the tub go put on the slow track, I later had a set of my own insert molds made since everyone knew them under my name and I continued to get calls on them and he had quit producing parts. Mike was likely not happy, but since he quit producing and I was getting calls for them, some friends convienced me to spend a few grand and have my own molds made. That ended up being a nightmare. I did not want to lay up glass at my shop, so I looked to outsource them and just resale them like I was doing with Mike. I went through more than half a dozen glass shops and none could produce the quality people demanded at a price that made them affordable and still worth doing on my end. I sold this direct and through BC Broncos for a while. I eventually sold the molds to Wild Horses and they later got stolen and sent to Mexico by a shop that was doing them for WH.

Years later, Mike comes back on the scene and shows up at the East Coast Bronco Roundup with the finished tub looking great, with all the features we'd discussed 10+ years earlier and more. We both put any past hard feelings we had aside, and moved on since holding any grude was pointless and not beneficial to either of us or the community we are both active in. Bottom line is that he made the best, most innovative Bronco glass out there hands down, and I have always said that, even when we had our business differences. I will not deny someones talent or dedication to their craft for any personal reasons.

Since then, my dad and I have bought a full set of molds to make Bronco golf cart bodies. We did this only after some long discussions with Mike and sending him many photos of the molds. We value his expertise and wanted him to make them for us since we knew he could produce a high quality part at a price that we could retail them at and eventually see a return on the thousands of dollars we had in the molds. Plus we knew Mike was fanatical about mold maintenance and taking care of them unlike many shops are, especially with customer owned molds.

Well, Mike made some golf cart parts for us, but then ended up selling BroncoDesign to the new owners in TN, so we are again looking for a local source since it is a 24 hour drive down to Nashville and back which is more than I want to do to get parts. However, I have not written that idea off 100%, because I have also seen their work up close and in person and am impressed.

Contrary to what you implied, I do not have to personally own a BD tub to know quite a bit about them and the people behind them considering the various levels or involvement with them over the last 14+ years. I do have a customers Kentrol project sitting out in my shop right now, and I can tell you I am not a fan of that.

  • Have you ever seen the molds that make these up close and in person, or even a finshed BD tub for that matter?
  • Have you ever spent hours doing side by side comparrisons of a Kentrol and Terra Comp (old Mallotte at the time)?
  • Have you ever done any hands on fiberglass mold design or part layup?
  • Have you ever owned molds or sold parts and had to battle to get high quality at an affordable price?

Please, tell me more on how finicky of a material fiberglass is, I'd love some more detailed insight that I missed along the way. I am no expert, I leave that to Mike and the new owners and others who do this day in and day out, but I have invested enough shop time and $ over the years in it to know more than the average person sitting behind a keyboard on the interweb.

For all intents and purposes, the gel coat and glass is cured before it comes out of the mold. Travel on a trailer will do nothing to the part unless it is physically damaged in shipment from dropping it or?

No, I did not take the time to start an offline discussion. I am not the one to make him happy, Mike or the new owners are. Like I said, if someone is experiancing an issue or who has uncovered some mysterious
"serious pitfalls", there is a way to say it without bashing. Just be factual. I.e, "I have tub #XX and I have found that my (insert item here) does not line up with (XXXX) like I expected and there is a Y" gap, has anyone else had this with theirs? Or, "I have one, but I was dissapointed in the (insert item here). I called BD and they told me....... (or I am in the works of trying to resolve this with them now).

But, to just throw a turd in the punch bowl with not a shred to support it is BS IMO whether it is towards BroncoDesign, a vendor I have never delt with, or even one I may not like myself. Venting to me is useless, it needs to be directed and resloved with BD or vented in a professional and factual manner here.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
I own one and have received support from BD. So someone owes me a Merit badge.
 

72pabronco

Full Member
Joined
Oct 18, 2009
Messages
172
I did and am building a BD tub! What is your problems? I for one would like to know. Maybe you can save me some trouble. The 3 new tub owners that picked up tubs at Carlisle last weekend might be interested also. I agree that its not a plug and install part here process but I for one had no problems that was not overcome. Most if not all new aftermarket steel parts are not any better. I spent more effort on a new dynocorn fender then the BD's tub
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Turd AHOY! Like it or not, the point still stands. Unless you own and have PERSONALLY attemtpted to assemble a BD body and seek support from BD, your opinion on the product is without merit.

The score so far:

BD Cheerleaders - 6. (3 with personal experience and comments to back it up.)

Detractors - 1. (Personal experience? 0 comments to back it up.)

So who's without merit? Calling BS on VT_Don. If you really wanted to keep this private your post to Drew should have been a PM to him.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
Turd AHOY! Like it or not, the point still stands. Unless you own and have PERSONALLY attemtpted to assemble a BD body and seek support from BD, your opinion on the product is without merit.

Are you serious? LOL

I guess I have to assemble a Rolex to know it is better than a Timex as well. ;D

I'm not sure what your background or skill level is, but as Tim pointed out, even metal parts (aftermarket and OEM/NOS) often need tweaking on these Broncos to get them how you want them or to a point that is acceptable.

I've built/restored more than a few EB's, and very few parts have been direct plug and play that required no tweaking, ajustment or modification, and this includes many parts you would *think* should be! So why would anyone think that a much larger, much more complex part like a tub or entire body would be completely void of any of these issues?

From those I have talked to and my experiance working with a couple Kentrol tubs, I would venture to say that the BD tub would take significantly less time to install and fit, as in possibly 1/2.

No, I can not speak to any tech support, and I did not since I have never attempted that.

However, I do know that Mike is very helpful and has spent hours on the phone with me discussing fiberglass, molds, etc. related to my cart bodies. I just can not imagine that if you actually spoke with Mike or Corey and that they just blew you off and left you hanging without helping you work through whatever "serious pitfall" you encountered.

I do know they were/are small 1-2 man shops, so they do not have a 24-7 tech line, and might not pick up everytime if they are in the middle of a layup with resin begining to set. I have had to wait a day or so at times for Mike to get back to me, so maybe that is part of your issue? Or maybe you caught them during their transition of ownership and they dropped the ball, who knows since it is all still a mystery.

If you are having issues getting your BD tub the way you want it, be glad you did not buy one of the others, cause those likely would have really thrown you for a loop! :eek:

You STILL have not presented one unbiased fact to support your claim (I.e. the door opening on my tub is 1" wider than my factory metal door and is leaving huge gaps, or the distance between the bedrails is off by 1/2" and my metal tailgate does not fit between the posts).

As a Manufacturing Engineer, I know better than to ever say it is impossible for there to be a quality issue or defect, but it might also just be that you got into a project that is over your head as I have seen many times before.

If you have a real problem, work it out with them, or present it in a factual way so some others can help you try to work through it. But to just launch turds and no facts will get you nowhere Captain.
 
Top