• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

kick down rod connection at carberator

boss

Full Member
Joined
Jul 20, 2014
Messages
177
Loc.
Pittsburgh
I recently purchased a 1975 the PO changed the transmission from manual to C4 automatic. I noticed that the kick down rod is missing and if I purchase one I don't know how it connects to the motorcraft carb. Any help or photos we be great.
 

vintage bronco

Sr. Member
Joined
Feb 8, 2010
Messages
850
if it was an orig std trans and now auto trans and carb is orig you will have to locate the correct carb for the auto trans it will have the provision for the auto trans kick down lever where manual trans carb did not have the provision.
 
OP
OP
B

boss

Full Member
Joined
Jul 20, 2014
Messages
177
Loc.
Pittsburgh
The PO had the carb rebuilt after the transmission was changed. I don't know for sure if it is for an automatic. How can you tell?
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
On the driver's side there is a linkage behind (same shaft but closer to the carb body) the throttle rod. this is for the kick down but if you have M/T carb you are out of luck. Time to go to the yard..
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
You don't need a new or different 2100-2150. You just need an automatic throttle shaft. The 2150 carb is calibrated to your engine. Finding an automatic 2150 that has the same calibration will be difficult. I'm sure I have the throttle shaft you need, that I can send for just shipping charge.
 

treihesse

Bronco Guru
Joined
Aug 1, 2008
Messages
1,459
Drill a hole in the bottom of the throttle linkage add a ball and hook it up. I had to do it to my howell TBI setup
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
I really like my Lokar kickdown cable.
Easy install and very adjustable.
I think JBG had the best price but any hot rod shop will have one for a C-4. They are not eb specific.
 
OP
OP
B

boss

Full Member
Joined
Jul 20, 2014
Messages
177
Loc.
Pittsburgh
Can you just use the Lokar for the kick down and stay with the existing rod from the accelerator?
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Can you just use the Lokar for the kick down and stay with the existing rod from the accelerator?

Good question. I did the throttle cable first. But I do not see why not. It is independent of the accelerator linkage so it should be fine.
BTW. Our eb brother mentions above that WH has a cheaper one.
 

treihesse

Bronco Guru
Joined
Aug 1, 2008
Messages
1,459
Yes all the kick down does is tell the c4 to down shift during wot. It will work fine. Make sure you cut the cable incrementaly until it engages the kick on the c4
 
OP
OP
B

boss

Full Member
Joined
Jul 20, 2014
Messages
177
Loc.
Pittsburgh
Jckkys
I for got to give you my mailing address if you can still send throttle shaft.
Bob Kremer
532 McElheny Rd.
Glenshaw, PA. 15116
Thanks. Let me know what I will owe you
 

mafconc

Jr. Member
Joined
Mar 12, 2013
Messages
125
kickdown at carb.

Pics of 73 if it helps.
 

Attachments

  • 100_0556.jpg
    100_0556.jpg
    149.9 KB · Views: 166
  • 100_0557.jpg
    100_0557.jpg
    131.3 KB · Views: 134
  • 100_0570.jpg
    100_0570.jpg
    132.5 KB · Views: 113
Top