• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Phone & GoPro Cage Mounts

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
Hundreds of people at the Off-Road Expo kept asking about the phone mount I had on our display. So now we're selling them.

They use out speaker cans clamps(fit 1.5-2" OD tubing) with RAM Mounts components.

IMG_1363.jpg

IMG_1366.jpg

IMG_5736.jpg

IMG_1371.jpg
The Short arms(2.38"), MED Length(3.69"), and Long arm(6") comparison.


The X-Grip phone cradle works great at holding on to any cell phone with any case. Quickly attache or remove your phone.
I've used one for a while now.

$44 with SHORT or MED arm
$48 with LONG arm

+$6 to add GoPro Mount to switch out with the phone mount.

$32 for GoPro with SHORT or MED arm
$36 with the LONG arm
-I like the long arm for the GoPro, it lets you really be able to point it where your want.

If you already have RAM Mounts components, you can get our clamp with 1" RAM Ball $15
 
OP
OP
TAWL_BOY

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
Let me now what all you want and your address and I'll send you a pay pal invoice.

I'll get them up on the site once I get some better pictures. Just got all the pieces in.
 
OP
OP
TAWL_BOY

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
Yup!

I had bought their roll bar mount, and I wasn't a fan. Couldn't easily move it.

So I figured this setup out. Really nice for quickly repositioning your GoPro too.
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
I just need 2 of the clamp and Ball mounts as (RAM) sponsors my other endeavors and I have a TON of ram stuff! However I like your cage clam WAY better! Just need to verify they work on 2" roll cage?

paypal atencati@msn.com
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I've got my Go-Pro mounted on the top of my roll cage pointing down the side, but I'm wondering if you have anything that I can mount off my door?

20140809_160735_zpsnlckgkh5.jpg
 
OP
OP
TAWL_BOY

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
I just need 2 of the clamp and Ball mounts as (RAM) sponsors my other endeavors and I have a TON of ram stuff! However I like your cage clam WAY better! Just need to verify they work on 2" roll cage?

You got a PM.

They do fit 2" without the rubber channel.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
2" - so they should fit just fine. I don't like the camera behind me as I don't know if it is still there or not :D
 

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
What size arm is the one in the pic on your website. Seems like a good length for how I want to mount my phone.
b83d49121f1167eae506901b9634c02f.jpg

Also will my Samsung galaxy S5 with otter box work with the mount? Thanks.
 
OP
OP
TAWL_BOY

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
I'm pretty sure that's the long arm. But you can see how the clamp is rotated with the ball pointing straight forward.

Is the S5 a "phablet"?

My wive's iPhone 6 in a case fits fine. I can get the "phablet" mount too. I just didn't figure I needed to stock them.

I have plenty of everything I posted in stock.
 

ChrisC74

Sr. Member
Joined
Dec 9, 2010
Messages
906
S5 fits great in the x mount. Mine has not fallen out yet. Mounts look great. Going to buy some to swap out with my ram mount clamps as soon as I get home.
 

ChrisC74

Sr. Member
Joined
Dec 9, 2010
Messages
906
Received my two CrawlTunes / Ram clamps - big improvement on the cheap hose clamp mounts that RAM sells. Looks better but more importantly they stay where you put them. My RAM hose clamp mount was constantly loosening no matter how tight I made it.
 

ChrisC74

Sr. Member
Joined
Dec 9, 2010
Messages
906
Just wanted to throw up a couple of photos of the installed CrawlTunes clamps. Happy with the fit and finish.

I will probably move one to another locations on the cage. The attachments are the x-mount and cup holder from Ram Mounts
 

Attachments

  • 2014-12-13 11.25.49.jpg
    2014-12-13 11.25.49.jpg
    73.2 KB · Views: 131
  • Go Pro 2014-12-13 11.24.30.jpg
    Go Pro 2014-12-13 11.24.30.jpg
    66.4 KB · Views: 127
Top