• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

hard top brackets how important

vfdbuddy

New Member
Joined
Jul 24, 2015
Messages
19
How important are the hard top brackets that slide into the rear quarter panel? The bronco is going in for paint this week and it has always been an issue of small scratches while removing or installing the top. Im hoping to eliminate this problem by removing the brackets and just bolting it on with all of the factory holes. Mine seems to be a constant are of squeaking also at that location and this might also eliminate that. Does anyone see a problem with removing these brackets Thanks
 

D.R.Y.

Full Member
Joined
Apr 9, 2015
Messages
271
Loc.
The Netherlands
Good question. I was going to weld nuts (or some type of cage nut) onto the underside. So it would be easier to remove it and reinstall.

What do you guys think of that idea?
 

Whoaa

Bronco Guru
Joined
Sep 26, 2014
Messages
1,059
I took mine off and threw them in the trash can!

The're really bad about rusting in place, make it a huge pain to remove/install the top, sqeak, and hard to get proper alignment for the topper door & tail gate.

After throwing the brackets away I welded some nuts on a flat bar that I could slide into place for the original top door slides or new-style shocks to bolt to.

In addition to getting rid of the old brackets, adding some of the new style shocks also helps to reduce another rattle http://www.wildhorses4x4.com/product/Liftgate_Shocks







 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
The brackets are what keep the rear window frame opening square. Sure you can remove them, seems a lot of people do, but that's why they're there.

Mark
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I've removed then on 2 Broncos and within a couple years the top of the rear quarters started spreading. The rear of the top spread with the quarters. Now I know why they made them and will never remove them again.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And if you don't already do this, loosening the electric wiper motor bracket to let it hang back a bit makes the job of taking off and putting on the hard top much easier.
Being easier to maneuver the front lip of the top around the motor means one less thing you'll have to worry about while trying to line up the rear corner posts.
Better for the paint.;)

Paul
 
Top