I would take a good hard look at your whole wiring system before pulling the trigger on a fuse box. Just make sure your wiring is good enough to justify it. You may benefit from a whole new wiring harness vs just a fuse box.
Thanks Guys.
I am not ready to do a full wiring job at this point either. I am trying to clean up some of the poor wiring decisions I have made over the 26 years I've owned this beast. I don't mind the stock location and I really don't need more than a few additional circuits. I was hoping to find a fuse box that has the connectors behind the panel (like the original). I might have to scavenge one from a newer car as omureebe suggested.
Jimbo, I was in the same situation you are in. I ended up buying Hella box (link below) and it has worked great. I have room for extra fuses now. And I wired it up so there is constant power for a few fuses and switched power to other fuses.http://www.rallylights.com/hl62941-atc-fuse-box-12-gang-waterproof.html
I used a Blue Sea fuse block with a dedicated power and ground feed for some accessories but used a simple blade fuse holder to replace the stock fuse box.
I kept mine mounted to the inner fender because most of my power needs were under the hood, and I didn't want to run a bunch of wires into the cab. But I like what you did here.






