67 sport dash trim find

[ClintEastwood]

Hello All,

I stumbled upon this. I believe it is a 67 sport dash trim. I don't have the clips for it and only one piece.


Can anyone confirm?

 

[gick70]

That's a piece,as I have it,in mine!

 

[ClintEastwood]

How does it mount? Assuming clips but didn't get any

 

[Slick]

You need to go buy all the Harry Potter books, cause it's held on magically ;-)

But seriously, I believe there are lil t clips that hold into the dash.

...never seen either, the trim pieces nor the clips offered for sale, but mine has em installed. Cep I'm not gunna rip at em to validate my assumption.

 

[MarsChariot]

Whoa! Get out of here, dude. This isn't the legendary lower dash trim in this diagram is it (bottom of the diagram)? I have always meant to ask if anyone had ever encountered it.

 

[BajaBronco]

What you can do if you dont have clips ...is just drill holes every 10" and screw it to the dash.



Kidding!!

 

[Slick]

Shoe goo glue maybe?

JB weld??

.......cammoflage duct tape so u don't see the tape?

 

[hucklburry rev2]

mcmaster.com maybe?

 

[.94 OR]

The supplied dash diagram is for a newer Bronco since it has the step out in the pad. The early ones were straight across.

Never seen that trim but makes me want one now.

 

[Lhofkamp]

Whoa! Get out of here, dude. This isn't the legendary lower dash trim in this diagram is it (bottom of the diagram)? I have always meant to ask if anyone had ever encountered it.

I've got a 67 that has the dash trim on the top and bottom. It's got holes every 9 inches and t clips with washers.

 

[Unknown]

I've got a 67 that has the dash trim on the top and bottom. It's got holes every 9 inches and t clips with washers.

Could we get a pic of that?

 

[cldonley]

There are generic clips available at some of the parts houses that may work for ya. Otherwise I'd recommend 1300L glue.

 

[COSCAG00]

Here is a picture of my 67 with the dash trim.

 

[okie4570]

I see one or two 67' per year that still have the dash chrome in olace, like this one.

https://albuquerque.craigslist.org/cto/5601277859.html

 

[thegreatjustino]

http://classicbroncos.com/forums/showthread.php?t=250903

http://classicbroncos.com/forums/showthread.php?t=215620

 

[Okbroncoman]

What you can do if you dont have clips ...is just drill holes every 10" and screw it to the dash.



Kidding!!

Just use some self tapping screws. Less drilling a lot faster!!!

Ha ha

 

[MarsChariot]

In my 4 and one-half decades of Bronco watching, I have to admit that I have honestly never seen that trim even though I knew it was on some of the exploded diagrams of instrument panels. How many times have we seen pictures of instrument panels on this site over the years, yet not one showed this trim? So I am ready to say that this is even rarer than the rocker trim.

 

[ClintEastwood]

I would agree for rarer than the rocker trim for sure. Again, I believe this rocker trim is about to be reproduced as well.

Anyone interested in reproducing the dash trim?! suppose it wouldnt be special then however