• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

In tank high pressure pump

John Marinan

Contributor
Sr. Member
Joined
Aug 9, 2009
Messages
680
Loc.
Durango CO.
I'm using a 23 gallon tank with a high pressure pump from Wild Horses. If the in tank pump fails on the trail, would a temporary in line pump pull fuel through the in tank pump to get me back? I"ve also heard that installing an access panel above the tank on the bed would allow access to the pump for an on trail replacement. I've also been told that it would be next to impossible to change the pump this way. Any thought on this?
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
...would a temporary in line pump pull fuel through the in tank pump...?
Depends on the design of the in-tank pump. Try it on the bench, to find out if it can be done. Then post what you learn.
I'm using a 23 gallon tank with a high pressure pump from Wild Horses. ... I"ve also heard that installing an access panel above the tank on the bed would allow access to the pump for an on trail replacement.
If the tank is built so the pump comes out the top, click this & read the captions:

I've also been told that it would be next to impossible to change the pump this way.
The stock eB tank has the sender coming out the front barely below the frame crossmember, so it's accessible from below, without much trouble. It wouldn't be visible from above, even with an access hole.
 

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
Id say NO to in tank pumps......a quality in line pump much easier to work on a trail! 2 fittings 2 wires n your done!!!

I will also say ive seen more Mech pumps go than ELE pumps in the last years (even brand new ones bad out the box), I say inline ELE all the way!
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
I'm building a access panel for my pump,I also have a 23 gallon tank,had a custom plate made so I can sandwich it to the tank with fuel rated gasket material.It should work fine,I have Jakes blessing from Aero,he gave me the go ahead on this,will let you know how this goes,can send you pics too.
Jim :cool:
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
How often do the in tank pumps that have been used in nearly all EFI cars and trucks for many years fail?

If they didn't usually last a long time the manufacturers would lose a lot of money on warranty repairs.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
In-tank pumps have the advantage of being cooled by the fuel surrounding them, and protected from the outside elements. They also generally have virtually no suction length on the pickup side, making them more efficient and reliable. While the inline pumps are easy to change, I've seen far more of those fail in the real world than their in-tank counterparts. I haven't gone EFI on my EB yet, but I will run an in-tank pump when I do.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
Mustang efi on mine. Tried in-line fp pump near rear diff with a heat shield and it would still overheat and shut everything down. Installed an in-tank fp and it was the answer. But I still have both fps installed and can use either one with the flip of a switch. That would be my remedy if either one failed on the trail.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
IF you want an external pump redundancy but normally want an in tank pump, use two pickups. One for the in-tank pump, another (probably capped) for the external.

That way if you ever feel the need to setup the external pump you just pull the plug, slip on a hose and hook up the external pump. This will get you home and give you a way to drain the tank so you can drop it.

Don't fuss with an access panel/hole.
 
Top