• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Drooll... Loving the look of the front engine cage. How are you mounting the grill and aprons to the frame mounts?


Sent from my iPhone using Tapatalk

Thanks David. I bought some threaded trick tabs from RuffStuff that I'm going to try to use. I might have to make my own tabs to accommodate for the small variances.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Not sure if the top tube will stay like this, but progress was made.



 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Man, that is one Big Ass Can'OWorms you opened up. Progress looks good,more progress would look even better,Just bustin your chops. I may be able to come out and lean on it while you work,other than that I don't know what I could offer .
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Man, that is one Big Ass Can'OWorms you opened up. Progress looks good,more progress would look even better,Just bustin your chops. I may be able to come out and lean on it while you work,other than that I don't know what I could offer .

Progress is hard to come by these days :-[
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
YES... and this is where Jaromy started from. :p


Love it! That was the first gathering in the Bronco. It had so many issues during that drive...no heat, wiring a mess, brakes were no good and so much more. It has come a long way
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Worked on the steering box this weekend. 1/4" plate on both sides of the frame, 3/4" DOM sleeves running through the frame rail. I will have a cross-member between the frame rails when I'm finished.

BD207290-E75A-4EC5-9A8B-664F8A432AD2_zpstttyvqf8.jpg


EB8DAD1D-BB69-4735-9C09-B770874081FE_zpsdlebyujh.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Latest pics of the engine cage. We are making inner fenders for my electronics to sit on and to protect a little bit if the engine bay. They will have panels of aluminum between the bars.

F035076F-23F5-46ED-8F87-A2C02208674C_zpshpf32ioj.jpg


78286895-2E74-4D24-ACB5-76EBD7FD8990_zpsnxmz9qv9.jpg


F72512AE-FC18-47E8-9A32-1E7DAC840675_zpsi3umttrh.jpg
 
Last edited:
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Omg.. It looks so GOOD!!!!! How hard would it be for you make that engine cage again?


Sent from my iPhone using Tapatalk

Thanks!! We saved the assembly in BendTech so I'm sure it could be made again easily.
 

BanditBronco

Sr. Member
Joined
Jul 2, 2008
Messages
690
Dude looking good! You will like having the flat sheets as quasi fenders to put stuff on. I run into the "where the hell am I gonna put this" issue with my tube set up a lot. Not the end of the world just gotta make brackets/clamps for everything.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Dude looking good! You will like having the flat sheets as quasi fenders to put stuff on. I run into the "where the hell am I gonna put this" issue with my tube set up a lot. Not the end of the world just gotta make brackets/clamps for everything.

Thank you! Doing it this way makes the most sense to me. I have a lot of stuff to mount right now. I'll change it all up when I go EFI and do a full rewire.
 

Joker11

Sr. Member
Joined
Sep 11, 2008
Messages
840
Loc.
Yuma, Arizona
Ok,
I have a question. I honestly do not want to offend you or anyone else here. I am loving your build. Don't get me wrong. The build is awesome.

But, why didn't you just build a tube buggy and hang some aftermarket sheetmetal Bronco fenders on it? Just about everything Bronco is gone on this build.
Why do all that to a LUBR? I am not a LUBR fan. I am just racking my head to figure out the route you went with this.

I support your right to build whatever you want. Go for it. That is the beauty of this hobby.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Ok,
I have a question. I honestly do not want to offend you or anyone else here. I am loving your build. Don't get me wrong. The build is awesome.

But, why didn't you just build a tube buggy and hang some aftermarket sheetmetal Bronco fenders on it? Just about everything Bronco is gone on this build.
Why do all that to a LUBR? I am not a LUBR fan. I am just racking my head to figure out the route you went with this.

I support your right to build whatever you want. Go for it. That is the beauty of this hobby.


I was never looking for an uncut Bronco so when I found this one I wanted to cut it from day 1. I held off and tried to make it into something that I wanted, but I finally gave into the urge and cut it. Now I'm building the Bronco that I have always wanted.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I was never looking for an uncut Bronco so when I found this one I wanted to cut it from day 1. I held off and tried to make it into something that I wanted, but I finally gave into the urge and cut it. Now I'm building the Bronco that I have always wanted.

Well said Jaromy. When I was working in the street rod shop we had a saying "It takes a real man to take a perfectly good car and cut it up into something beautiful". well I can't type what was really said, but that's close...LOL

I too applaud you for building your vision the way you want it and not let anyone (including yourself) tell you different. Metal was made to be cut;D
 
Top