• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Jerry Cans

billd987

Jr. Member
Joined
Feb 4, 2011
Messages
116
Here is how mine is on the back.
 

Attachments

  • IMG_8115.jpg
    IMG_8115.jpg
    84.7 KB · Views: 157
  • IMG_8116.jpg
    IMG_8116.jpg
    78.4 KB · Views: 140

BigToe

Sr. Member
Joined
Nov 24, 2012
Messages
517
I do like these but a little pricey for something I might use once a year. How does the cover seal? Any leakage? I've o ly seen used NATO cans and most have been beat.

Sent from my SM-G900V

I use 'em on a regular basis to bring gas from Tucson to where I keep my Bronco, no leaks and no complaints after about 4 years of use.
 

kb6677

Contributor
Bronco Guru
Joined
Jan 19, 2004
Messages
2,178
I started using this company 5 years ago when I needed to carry 10 gallons of fuel on trips with no gas stations near the park or longer drives on the pavement than I wanted with the stickies. The NATO cans were 39.95 then. I have three from him and still use them for above and lawn/garden gas engines.


https://www.campingmaxx.com/camping-and-hiking-gear/accessories/nato-jerry-cans.html

This is the only place I have found the "old school" non epa compliant spouts. I have a spare and a set of spare gaskets as well.

https://www.campingmaxx.com/nato-gas-can-nozzle.html

Pricey I know, but like I said, mine are 5 years old............
HTH
 
OP
OP
broncokak

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
I picked up two of these spindle kits to make a (or a pare of) swing out carriers. My original idea was two, one to carry the spare and maybe the hi-lift and the other to carry the gas cans and maybe make (at a later date) a detachable cooler rack.

Just debating with myself over making one rack or two? Lots of weight on just one I would think. Plus I could make the rack for the gas cans detachable so I wouldn't need to have it on the bumper if I didn't need to carry the gas cans.

What cha all think?
 

Attachments

  • spare rack.jpg
    spare rack.jpg
    45.8 KB · Views: 76

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I looked at the spindle kits but keep coming back to I'd rather have the carrier pivots in double shear.
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
I looked at the spindle kits but keep coming back to I'd rather have the carrier pivots in double shear.


Why? They don't fail in single shear when used on a trailer. Do it Ken! Holding up nicely with a 35 on it.
 

Attachments

  • IMG_0967.jpg
    IMG_0967.jpg
    111 KB · Views: 134
  • IMG_0863.jpg
    IMG_0863.jpg
    110.7 KB · Views: 87
  • IMG_0821.jpg
    IMG_0821.jpg
    79.7 KB · Views: 103
OP
OP
broncokak

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
I looked at the spindle kits but keep coming back to I'd rather have the carrier pivots in double shear.
Could easily make a top bracket I suppose. I'd need to get a seal for the top as well.

Sent from my SM-G900V
 
OP
OP
broncokak

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
Why? They don't fail in single shear when used on a trailer. Do it Ken! Holding up nicely with a 35 on it.

Very true, I'm not going to keep the carrier loaded when I don't need to have the cans of hi-lift handy. It's a 1" spindle so I would think it would be plenty. I'd worry more about the end of my old bumper before I'd worry about the spindle.
 

SSGWood

Full Member
Joined
Feb 10, 2014
Messages
273
Loc.
Elizabethtown
I'm starting to think the plastic can is the way to go. No just or paint to deal with. maybe have a canvas cover made to keep the sun off them while in use on the back rack...or is that over kill?
We had plastic on the back of our HMMWV and BFV when I was Army. They were exposed to the elements 6 months out of the year. And a year when I was deployed in the desert. The plastic has the color in it, it doesn't fade (or not that I noticed)
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
Top