• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Twin Stick Shifter Boot

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
Does anyone else have the problem of the twin stick shifter boots bunching up and not looking so great. See the image below to show what I am talking about (not mine). I am wondering if anyone has used the one from TBG instead, and does it has the same issue?

bunched up:
Twin-Stick-13.jpg


JBG boot:
twnstkboot.jpg
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Got mine from TBP.
It doesn't do that but you look like you have a 3" body lift.
This means your boot is having to tolerate a wider swing of the shifter than mine.
But again my TBP boot doesn't seem to do that with my 1" body lift. BTW my twin stick shifters are modified/straightened out too but that shouldn't matter.
 
OP
OP
E

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
That pic was not actually from mine; it was just an example of what I am talking about. I do, however, have a 1" BL on mine currently.

Eric
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
That gray one looks high quality and the leather one definitely wouldn't get all catywampus.


But my TBP boot is great,
But Remember I bent/straightened and prolly separated my shifters. I put them in my press and kept tweaking them until they were out of the way.
 
OP
OP
E

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
That gray one looks high quality and the leather one definitely wouldn't get all catywampus.


But my TBP boot is great,
But Remember I bent/straightened and prolly separated my shifters. I put them in my press and kept tweaking them until they were out of the way.

I had to do the same. They were way to far back after my 4r70w install, and they were pretty close together as well.
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
I have the WH integrated 1in. body lift and JB Fab twin sticks NV 3550 and that shitty rubber dual boot, it gets nasty when I shift one or the other but when left in neutral they're happy, I'M gonna get that leather boot someday, looks way nicer. %););D:cool:
 
OP
OP
E

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
I have the WH integrated 1in. body lift and JB Fab twin sticks NV 3550 and that shitty rubber dual boot, it gets nasty when I shift one or the other but when left in neutral they're happy, I'M gonna get that leather boot someday, looks way nicer. %););D:cool:

Good to know about cleaning, I was wondering about that. Mine is bunched up just sitting on the shelf now because it was bunched while in rear drive high for so many years.
 
Top