• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Warn 8274 - possible refurbish/fix help

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I bought this winch about 4 years ago for almost nothing. Never used or worked on one. Obviously needs a handle or knob for the clutch. Solenoids and wiring looked bad and wouldn't work with the remote that came with it. I bought a new solenoid pack and remote for it but haven't put it on yet. The motor will run but the drum didn't turn, hoping it's just out of gear. Need to get the old cable off, replacing with synthetic rope and a new fairlead.

Anyway, this might turn into a winch rebuild thread, thought I would go ahead and post now so anybody with knowledge and experience could chime in before I got too far. Might save me some $$ and aggravation.
 

Attachments

  • IMG_9780.jpg
    IMG_9780.jpg
    104.6 KB · Views: 130
  • IMG_9782.jpg
    IMG_9782.jpg
    135.4 KB · Views: 154
  • IMG_9831.jpg
    IMG_9831.jpg
    114.6 KB · Views: 125

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
One of the beauties of the winch is its big long winch cable. Sure you want to switch to synthetic cable? Its going to cost you a fortune in synthetic. That winch is really exposed so if you go synthetic get a cover to keep the sunlight off the rope.
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
One of the beauties of the winch is its big long winch cable. Sure you want to switch to synthetic cable? Its going to cost you a fortune in synthetic. That winch is really exposed so if you go synthetic get a cover to keep the sunlight off the rope.

Yep. I'm done with steel cable. The cable needs to be replaced, putting 100ft of synthetic like I have on my other Bronco, been using for 3 years without fail. Between that and couple of 30ft straps, just can't see needing more than that where I wheel with mine.
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
Out of the box I thought those things spooled more like 150' of steel cable? Just looked, yep, 150' of 5/16" cable on the current production: https://warn.com/truck/winches/M8274-50.jsp

If you're going to synthetic you'll want to dress smooth any roughness on the spool.

Have a look at the gigglepin offerings for this winch series. May or may not be something of interest there. Do me a favor and ask them about a reverse rotation brake cam as that would allow winching off the top of the drum which would pull the motor down a bit out of radiator flow.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
One of the better winches out there.. Wish I hadn't got rid of mine....
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015

Yep. I overhauled the one now on the front of my '78 ("before" and "after" pics below). I'm sticking with steel cable because I do a lot of recovery work and that often involves snatch blocks and long distance pulls. The Warn on my '76 EB is getting new synthetic though...since the only time that winch will be used is on trails.
 

Attachments

  • IMG_0430.jpg
    IMG_0430.jpg
    104.9 KB · Views: 102
  • IMG_0558.jpg
    IMG_0558.jpg
    123.8 KB · Views: 123

Toddpole

Sr. Member
Joined
Jan 2, 2008
Messages
832
I'm just gonna leave this here.
 

Attachments

  • adventure-twin-motor-top-housing-bundle-deal-1-[4]-408-p.jpg
    adventure-twin-motor-top-housing-bundle-deal-1-[4]-408-p.jpg
    65.8 KB · Views: 182

Trappey74

Full Member
Joined
Sep 22, 2015
Messages
303
Loc.
Cleveland
There is a guy that does rebuilds and has older model winch parts that would be good to check with. Website is hermtheoverdriveguy.com. Think you can even send them in to him for basically a complete rebuild.
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
That lower gear box is interesting. Looks like a stainless investment casting. Pretty sure it is not aluminum with those thin tabs welded onto it like that.
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Recap from first post, Cleaned up the contacts on the motor and installed the new solenoid pack, replaced the missing knob. And it works great, just need to get new cable/rope on it. I'm sure the mechanicals of it could use freshening up but for now works. Just getting this Bronco going, after running it a while will come back to the winch.

It needs the boots replaced on the terminals where they connect to the motor, those didn't come with the solenoid pack. I've only found them in a rewire kit that's $45. Anybody know where I can find just the boots? Need 3 of them.
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Forgot the pics...always need pis
 

Attachments

  • IMG_9921.jpg
    IMG_9921.jpg
    97.7 KB · Views: 111
  • IMG_9922.jpg
    IMG_9922.jpg
    106.3 KB · Views: 126
Top