• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
Jdgephar

Latest activity Postings Images Garage items About

    • Jdgephar
      I taped a patch over one of mine. See to the left of the gauges. There are all kinds of stickers, too. Sent from my SM-S916U using...
    • Jdgephar
      If the link up to the outside door handle is too tight, I know that's one way it won't unlock or open. I had to loosen my passenger...
    • Jdgephar
      Jdgephar replied to the thread Front fender brackets.
      Are any of these what you are looking for? https://shop.broncograveyard.com/Steel-Front-Clip-Fenders/products/773/
    • Jdgephar
      Jdgephar replied to the thread Duffs Long Arm bracket weld.
      No bolts, and it was never drilled for them either. Sent from my SM-S916U using Tapatalk
    • Jdgephar
      Jdgephar replied to the thread Duffs Long Arm bracket weld.
      Mine are just welded around the outside of the bracket. Seems to have held up over the unknown number of years they have been there.
    • Jdgephar
      Jdgephar replied to the thread KC Daylighters.
      Does anyone have a source for bulbs anymore? I bought a couple pairs many years ago, but not sure if you can find them anymore? Sent...
    • Jdgephar
      Jdgephar replied to the thread KC Daylighters.
      If you keep the length short, you can run 20 amps on 16 guage. 14 or 12 will get you longer wires if needed. 20 amps will get you...
    • Jdgephar
      Yooper... Sent from my SM-S916U using Tapatalk
    • Jdgephar
      Jdgephar replied to the thread Drum size question.
      My only other clue (but not necessarily good information) is a question posted in a 1967 - 1972 F-100 & Larger F-Series Trucks forum...
    • Jdgephar
      Jdgephar replied to the thread Drum size question.
      Appears to be a '77 setup. Axle flange spacing is same as a '77. Do your drums install all the way up to the backing plate when they...
    • Jdgephar
      Jdgephar replied to the thread Tech help in MI?.
      Sorry, I'm not much help (too far away). I did see a beautiful EB on top of the hill a couple years ago (west side of highway) as you...
    • Jdgephar
      Jdgephar replied to the thread Krawlers Edge AWOL.
      I just wanted to say I had a great experience last fall. I called to order mine, and it needed to be ready for me to pick up in person...
    • Jdgephar
      Above or below the bridge? Where I'm from, some consider "northern" to still be south of the bridge.
    • Jdgephar
      Jdgephar replied to the thread Ballast resistor question.
      Both sides of the resistor will measure 12V when the circuit is open. Now, what is open? The next item in your system is the coil...
    • Jdgephar
      Jdgephar replied to the thread Explorer swap timing.
      In short, late model 302 "HO" is different from the early 302 firing order. This assumes you also have the explorer motor cam as well...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top