• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

F250 shock tower bracing

sigepkat

Full Member
Joined
Sep 23, 2004
Messages
281
I know that the towers need to be welded to the frame, but does the frame need any beefing up right there to handle the additional leverage the longer shock could put on the frame? I read online in a few places that putting a plate behind the shock tower to strengthen things is required to prevent ripping the frame...

CM
 

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
It does not. The shock towers may be longer, but it's all in the Y direction. The F-250 shock towers may be closer to the frame in the X direction than the stock shock towers and being closer lessens the moment arm of the given area. You are good, as I use and love my F-250 towers.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
This is one good way (this is not my rig):
 

Attachments

  • bracket weld to the frame F-250 mounts bolt to.jpg
    bracket weld to the frame F-250 mounts bolt to.jpg
    120.8 KB · Views: 231
  • F250 shock mount base.jpg
    F250 shock mount base.jpg
    130.9 KB · Views: 256

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Some of the guys cut the stock tower a few inches above the frame and used the remaining part for bracing behind the 250 mount. It allowed em to mount it taller for a longer shock
 
Last edited:

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
If you use correct length shocks, not too long or too short. The mounts won't have a huge load on it other than the dampening of the shock. The F-250 doesn't have any additional reinforcements. My buddy recently tore his mount off the frame, only because he also mounted a limiting strap off of it.
I added 2" to the length of my F-250 mounts, drilled 6 holes in the center portion and plug welded them to the frame. Been great for 10 years now.

Mark
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Similar to garberz I added length to mine back in '99.

Mine actually sat on top of the frame rail for a longer shock. I then welded braces (angle) vertically to hold them. They were abused till last fall and never failed.
 

RODRIG3911

Contributor
Bronco Guru
Joined
Jul 9, 2007
Messages
1,019
Loc.
Tucson
I used one bolt hole to bolt them on and I plug welded the second bolt hole to the frame. Also welded the sides and top... I've 4 wheeled mine hard and they hold like a champ to any abuse I toss at them
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Does anyone have any info on these? Dimensions or templates to use. I am in the process of welding these on and have just stopped because id like to do this.

They are made of rectangular tubing the width of the F250 shock towers.

I am 99.9999% sure that his rig is different from yours, so an exact copy of those would not be needed.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
They are made of rectangular tubing the width of the F250 shock towers.

I am 99.9999% sure that his rig is different from yours, so an exact copy of those would not be needed.

Yeah, Jesse's truck has full-width axles on it so the brackets would probably need to be pushed closer to the frame with a standard width axle.

Todd Z.
 

igottastanger

Sr. Member
Joined
May 23, 2011
Messages
389
Yeah, Jesse's truck has full-width axles on it so the brackets would probably need to be pushed closer to the frame with a standard width axle.

Todd Z.

Well im going to be running 78/79 full width axles with the coil spring relocation from wild horses so i think we might be pretty close to the same.
 
Top