- Joined
- Oct 14, 2004
- Messages
- 5,001
I don't normally post these type threads because you are only praising a company for doing what they are supposed to do. I personally have never had bad service from any of our vendors. I've had some things happen but it was always made right.
I bought a set of the RCV axles when they first started being sold by one of our vendors approx. 6 years ago. They were installed into a D44 that was being put together for a Bronco that was just finished within the last couple months. So, they sat unused installed all this time. This past weekend that Bronco hit the trail for the first time. Drove it around for a half hour or so, hit a couple of obstacles that hardly would even require a locked front, coming down off the 2nd obstacle the front end started making a noise, loud noise, in the left front wheel, shortly after it was determined the left front was no longer pulling. After investigating it was found that the stub shaft had worked its way out to the edge of the CV joint and stripped the splines. I also noticed this axle was not pinned like the axles that I put in another Bronco a couple years ago but appeared to have a snap ring that held it in place. I was a little worried that maybe we hadn't connected it properly when installing. I also had no idea where to find my receipt.
I called RCV Customer service and described what happened. I learned that the early axles were not pinned and were subject to the problem I had. The rep asked me to email him a picture including my name and address and he would get replacements for both sides sent out ASAP. This was like 15 minutes before they closed for the day. Within an hour I had replies from 2 different people letting me know that the parts would go out the next day, which they did and I had them within 2 days. It's a pretty good sting when you pay for those axles but seeing how they stand behind the product makes it well worth it.
I bought a set of the RCV axles when they first started being sold by one of our vendors approx. 6 years ago. They were installed into a D44 that was being put together for a Bronco that was just finished within the last couple months. So, they sat unused installed all this time. This past weekend that Bronco hit the trail for the first time. Drove it around for a half hour or so, hit a couple of obstacles that hardly would even require a locked front, coming down off the 2nd obstacle the front end started making a noise, loud noise, in the left front wheel, shortly after it was determined the left front was no longer pulling. After investigating it was found that the stub shaft had worked its way out to the edge of the CV joint and stripped the splines. I also noticed this axle was not pinned like the axles that I put in another Bronco a couple years ago but appeared to have a snap ring that held it in place. I was a little worried that maybe we hadn't connected it properly when installing. I also had no idea where to find my receipt.
I called RCV Customer service and described what happened. I learned that the early axles were not pinned and were subject to the problem I had. The rep asked me to email him a picture including my name and address and he would get replacements for both sides sent out ASAP. This was like 15 minutes before they closed for the day. Within an hour I had replies from 2 different people letting me know that the parts would go out the next day, which they did and I had them within 2 days. It's a pretty good sting when you pay for those axles but seeing how they stand behind the product makes it well worth it.











