• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Antenna location?

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
On my '77 the antenna is on the passenger side. The antenna looks to be aftermarket and the base wobbles, so I have bought an electronically retractable antenna I would like to install but my mechanic is too lazy every time I ask him. If anyone has time to comment, how hard is it to replace a fixed antenna with a new retractable one on the passenger side? Thank you.

Actually, I did this exact thing in the 80's (although it was on the driver's side using the OEM location that I had). It was not really hard to do at all, the trick was to get the right kind of antenna to fit the OEM bezel that mounts it to the fender on the curve of the metal. I got the antenna from JC Whitney or somewhere like that, and my OEM mounting hardware threaded right onto it at the top (so I was lucky), and I used some metal strapping to mount it to the inner fender. The rest was just wiring it up, and that was not hard.

Only thing was back then I drove the Bronco through PA winters and the salt spray rotted that motor mechanism out in about a year or two. That location is really susceptible to corrosion from the tire throwing everything at it.

Good luck.

Rich
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
FYI.
There are even dimples on trucks that didn’t have factory installed radios on the drivers side metal. Those are the for location when drilling.
I would suspect that most all of the passengers side were dealer installed.


Sent from my iPhone using Tapatalk
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
For all those that have theirs on the passenger side, was it always a factory style antenna, or aftermarket?
Where exactly is the hole in the inner panel for the cable to pass through?

Paul
 

1strodeo

Contributor
Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,600
Loc.
Wisconsin
I’ve got you all beat, mine was on the bumper ;D
 

Attachments

  • 5B877009-6E26-4C30-8FDC-A389C115DAEA.jpg
    5B877009-6E26-4C30-8FDC-A389C115DAEA.jpg
    85 KB · Views: 227

Fostertn

Contributor
New Member
Joined
Feb 20, 2022
Messages
9
Loc.
Columbia
Hey folks,

I’m installing new fenders without any antenna holes. I have a repop antenna from one of our friendly vendors. Does anyone know the correct location on the fender? Drivers side mine was originally....I didn’t take the measurement though before getting rid of the original fenders. Thanks !
I have enough detail on location, but am curious if you had any trouble drilling the hole? I have a Bronco shop manual that advises a 1.187" hole and location, but that puts the center point slightly on the downside slope of the fender...too bad it cant just be at the peak of the fender where there is less chance of screwing up the drilling of the hole. Any suggestions? I assume you found a way to safely drill that hole. I made the mistake of painting before installing the antennae!
 

tampabronco

Sr. Member
Joined
Jan 10, 2011
Messages
468
My 76 had it on the drivers side. My 77 has it in the passenger side both factory am radios
Maybe somebody knows Maybe somebody in 77 drilled a hole on the wrong fender that's why mine is on the pass side
My 76 is on the passenger side
 

69_Sport

Full Member
Joined
Nov 5, 2014
Messages
286
If Broncos are like other Fords of the era, and I believe they are, then the antennas were ALL installed by the dealership.
Radios were extra cost options, so a Marti report will show whether a particular Bronco had a factory radio or not.
But either way, the antenna was dealer installed which may explain why they aren't all alike...
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
I have a Bronco shop manual that advises a 1.187" hole and location, but that puts the center point slightly on the downside slope of the fender...too bad it cant just be at the peak of the fender where there is less chance of screwing up the drilling of the hole.
I think that’s correct simply because of the design of the antenna.
If you remember they were not designed to sit on a flat surface or at the center peak, but in fact had that large-ish bezel with much more material on the outside / down side of the fender.

Can’t say myself whether more of the hole is on one side or the other of the peak of the fender, but if you grab the bezel part of the antenna and line it up with where you expect the hole to go, you can see how it will fit.
 

msommer001

Sr. Member
Joined
Jan 15, 2009
Messages
435
Here are some pictures of my ‘77 that I posted in an older thread...
276dc94a14e434318c4b40c282e7d0fc.jpg
153f3320b60c699d14fb6b2d977fcbbd.jpg

Hello, I am a few years late to this discussion but do you have any photos of the interior kick panel or inner fender area?


Sent from my iPhone using Tapatalk
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
Hello, I am a few years late to this discussion but do you have any photos of the interior kick panel or inner fender area?


Sent from my iPhone using Tapatalk

Funny that you ask…. I happen to have my vent box out so I just went out and took some pictures. It is 3 1/4 down from the cowl/fender lip, and 8 1/8 in from the dash edge. Let me know if you need more pics.
815fdfbfd4f17043266bc302be7edae1.jpg

c45a2e22a7607de057d12836afb92750.jpg

fd78313780d4856ac4337f1c029a4664.jpg
 

msommer001

Sr. Member
Joined
Jan 15, 2009
Messages
435
Funny that you ask…. I happen to have my vent box out so I just went out and took some pictures. It is 3 1/4 down from the cowl/fender lip, and 8 1/8 in from the dash edge. Let me know if you need more pics.
815fdfbfd4f17043266bc302be7edae1.jpg

c45a2e22a7607de057d12836afb92750.jpg

fd78313780d4856ac4337f1c029a4664.jpg

This is very helpful. Any images of the inner fender area? Trying to gather all data point before I start drilling…I tend to measure 10 times before I cut…

Happy New Year.


Sent from my iPhone using Tapatalk
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
This is very helpful. Any images of the inner fender area? Trying to gather all data point before I start drilling…I tend to measure 10 times before I cut…

Happy New Year.


Sent from my iPhone using Tapatalk

Maybe these will help. This thing was undercoated at the dealer when new so it may be hard to see stuff…
5c803cc6dc9932680de330c2f65e6f43.jpg

810af45e6e6eb5b4af72b79db3894c7c.jpg
 

msommer001

Sr. Member
Joined
Jan 15, 2009
Messages
435
Maybe these will help. This thing was undercoated at the dealer when new so it may be hard to see stuff…
5c803cc6dc9932680de330c2f65e6f43.jpg

810af45e6e6eb5b4af72b79db3894c7c.jpg

Thanks again. Looks like it is fair close to where the inner fender and back side of the door hinge meet.

I appreciate the quick response and requested photos.


Sent from my iPhone using Tapatalk
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
Thanks again. Looks like it is fair close to where the inner fender and back side of the door hinge meet.

I appreciate the quick response and requested photos.


Sent from my iPhone using Tapatalk

Yes, pretty much directly below this fender bolt…just a tad in front of it.
09300142d7dd4e70a089e601802fb3c0.jpg
 
Last edited:

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Looks like your rubber grommet literally disintegrated where the wire goes into the cabin.
Or has it been removed on purpose? Or maybe I just can’t see it anymore because it blends with the undercoating! 😁
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Sorry, I don't have measurements. But there are two small dents were the screws go.

This is the seal that comes with the reproduction antennas. The top hole you see, if memory serves, is for the wiring harness clip that has a rubber seal on it. Lower hole is for the antenna stabilizing bracket.
 

Attachments

  • IMG_20250719_161919465_HDR.jpg
    IMG_20250719_161919465_HDR.jpg
    304.5 KB · Views: 71
Top