• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hydroboost extremely sensitive pedal

Thatbroncokid

Jr. Member
Joined
Mar 5, 2015
Messages
135
Loc.
BC Canda
Can't figure out this hydrboost thing for the life of me. Got it out of an astro, hooked everything up, no leaks, no restrictions anywhere. I hear of people saying how good the hydrboost is, but this is plain scary. Unless i barely breathe on the pedal, all 4 drums lock up like nothing. the first time i hit the pedal rolling out of my driveway i sent my girlfriend and all my tools flying towards the windshield. The pedal is extremely sensitive and I'm worried it would be dangerous in a situation where I slam them on. Pedal travel is quite short and not quite as long as id like it to be. I can live with the pedal travel as it is, but the sensitivity is crazy. I'm not sure what or where I went wrong. I have some possible problems, but hopefully someone can confirm them. Astro master, astro hydro, stock power steering pump, brand new lines all around, power steering is silky smooth.

Master too big or too small?
Is there some adjusting that needs to be done to the rod between the hydro and master?
Space the master cylinder from hydroboost?
Hydroboost FUBAR?

I've searched the forums high and low but I haven't found anyone else whos brakes are too good. I guess of all problems to have it isn't the worst, but im nervous to drive it.

Thanks in advance
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Hydro-boost with 4 wheel drums?

Not sure I have heard of someone doing that yet,
Vacuum booster (ie weaker) yes but not hydro-boost (ie waay stronger).

Ya know there is very little volume in those drum wheel cylinders. That could be the issue. Maybe for the hydro-boost to work right you need more volume like a caliper would provide?
 

BOBS 2 68S

Full Member
Joined
Jul 26, 2015
Messages
280
Loc.
Hudson, CO
I adjusted the pedal so all I need to use is my toe not my whole foot. Pedal is closer to the floor. I had to relearn how to drive my bronco with power steering with hydro-boost.
 

PaveBronco

Sr. Member
Joined
Oct 30, 2012
Messages
914
yep, you're pushing way too much volume to the front cylinders, you have a master made for disk brakes which have a larger piston surface area so needs more volume. if you can go to disks up front that's the best option, and the safest. I'm sure there are other things you can do, interested to see what the rest of the CB folks say. If there are other solutions.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
You are trained for the old manual brakes. Probably just need to drive it and reteach yourself.

When I did hydroboost it was the same thing. They were too strong. I had a hard time going around the block. But after one trip around the block I could actually drive it. The more I drove it the better it got. I had a friend who had never driven a Bronco ever in his life drive it. Gave him no warning about the brakes at all. He drove it just fine. Even when I asked about the brakes after he didn't have anything bad to say about them. After that I sent Todd Z. around the block to see what he thought of my combo. He thought they were very good feeling.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Just curious, did you change your power steering pump? I had a new pump built and it puts out more pressure than a Hydroboost is rated for. Was told what's happening to you is what would happen to me if I installed a hydroboost, but not sure if that's correct. I think a HB is rated for like 2.5 gals a min and mine does 3.5.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Just curious, did you change your power steering pump? I had a new pump built and it puts out more pressure than a Hydroboost is rated for. Was told what's happening to you is what would happen to me if I installed a hydroboost, but not sure if that's correct. I think a HB is rated for like 2.5 gals a min and mine does 3.5.


Gallons per minute is flow not pressure.
A hydroboost uses pretty high pressure but very little flow, most of the flow bypasses the hydroboost working parts and goes to the power steering.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Gallons per minute is flow not pressure.
A hydroboost uses pretty high pressure but very little flow, most of the flow bypasses the hydroboost working parts and goes to the power steering.

Thank you sir. Maybe I can put on a hydroboost anyway! The pump is what kept me from doing it.
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I thought my dik / drum hydroboost was overly sensitive at first. It is - and I still think that but I also understand I added 6X boost versus 4X boost for vacuum assist.

What is complicating your situation is drum brakes are self energizing. AS you apply them the work against the drum to give more leverage by design. That is why power drum brakes are not a "thing" - they are pretty easy to use by nature. Being easy and naturally self energizing use plus 6X boost is going to make them pretty sensitive.

If you do a disc conversion with the correct M/C it will still be sensitive just not as sensitive as it is now. My Dad gets out of his Heep and drives my Bronco and he hits the steering wheel a few stops before he modulates better!
 
OP
OP
Thatbroncokid

Thatbroncokid

Jr. Member
Joined
Mar 5, 2015
Messages
135
Loc.
BC Canda
Thanks for all the replies so far! I will continue trying to get used to it, but all the replies so far make good sense. If i can track down a disc swap close to me ill definitely throw it on the truck. hopefully that should help things a little bit. The truck didnt have power steering when i bought it, but it is a power steering pump from another early bronco.
 
OP
OP
Thatbroncokid

Thatbroncokid

Jr. Member
Joined
Mar 5, 2015
Messages
135
Loc.
BC Canda
Update:

Picked up some front discs from a friend today. Gonna get those installed in the next while and see how she goes, ill report back when ive got it all in
 

fordman2121

New Member
Joined
Aug 13, 2017
Messages
9
I havent drove mine other than in and out of the building and on to the trailer. But I just installed an 08 booster, explorer pump and factory MC with all drum brakes. It is sensitive as well but I need to get brakes adjusted and drive it to see if its just from it sitting while I build it for months. Ill know more next week on my set up.
 
OP
OP
Thatbroncokid

Thatbroncokid

Jr. Member
Joined
Mar 5, 2015
Messages
135
Loc.
BC Canda
I havent drove mine other than in and out of the building and on to the trailer. But I just installed an 08 booster, explorer pump and factory MC with all drum brakes. It is sensitive as well but I need to get brakes adjusted and drive it to see if its just from it sitting while I build it for months. Ill know more next week on my set up.
Let me know how it goes! very curious
 

Casey835

Sr. Member
Joined
Mar 8, 2008
Messages
759
Mine was the same way when I installed hydro boost, then one day something happened while driving and applying brakes. Something gave and it went to almost no brake until the bottom of the pedal. In other words it has good braking power but it at the bottom. This is on four wheel disk. Never have figured it out.


Sent from my iPad using Tapatalk
 

fordman2121

New Member
Joined
Aug 13, 2017
Messages
9
Let me know how it goes! very curious

After adjusting the drums out it inst bad at first engagement but then a little more pressure it gets a lot more touchy. A little seat time and its not bad at all. It will lock all 4 35s up when needed. For a trail rig not sure i need to add the front disc brakes but will see how they act after getting some mud and water in them. Over all Im very pleased.
 
Top