• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Speedometer needle replacement?

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
Today I started installing my Centech harness. I got the fuse panel in and some of the switches mounted to the dash (which I have out of the vehicle). I grabbed my old harness and took off the speedometer gauge cluster and was about to install the wires. I looked at the speedometer and the needle fell off, it is broken off of the center circle.
Can you replace the needle or is it a whole new speedometer to fix it?

Thanks in advance!
 
OP
OP
langester

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
I guess my next question is how hard is this to do? I have never torn one of these apart to work on them except to change out a gauge. Anyone got advice or tips on the repair?
Thanks in advance!
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I have not needed to do it, but if I do I will probably ask Kevin as I have found him to not be stingy with his knowledge.
 
OP
OP
langester

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
Thanks for the reply, Good to know. I hate to bother folks that do things like this for a living, feels like I am cheating them out of money somehow. I will give him a shout and see what he says. I did find another head here local and am going to put it in for now. I will rebuild the broken one I have now for future use.
Thanks again for the help, always appreciated Sir!
 

tirewater

Bronco Guru
Joined
Jan 28, 2011
Messages
1,046
Loc.
San Francisco Bay Area
Well, he does have incentive to help you:

1. He sells a needle, plus whatever you feel you need to get (voltmeter)
2. You attempt the repair and break your cluster - thus giving him more business.
-or-
2. You successfully do the install.

Either way, he gets good will and more customer sales.

Thanks for the reply, Good to know. I hate to bother folks that do things like this for a living, feels like I am cheating them out of money somehow. I will give him a shout and see what he says. I did find another head here local and am going to put it in for now. I will rebuild the broken one I have now for future use.
Thanks again for the help, always appreciated Sir!
 
OP
OP
langester

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
Very true, I did not look at it from that perspective. Like you say its a win win either way. More than likely I break it, not much for the finesse work. More caveman style for me! Ha!
Thanks for the reply!
 
Top